Was 9/11 a conspiracy??

Was 9/11 a conspiracy??

Created by djhixx on Oct 13, 2007

55,132 votes

Click on an option to vote

yes

no

well, im not sure

“Twoof, a true act of ignorance”

Since: Jun 09

Canada

#256397 Jun 13, 2013
onemale wrote:
<quoted text>There were several new hires that claimed to have worked in a machine shop but you couldn't tell it watching them. The management soon learned not to turn them loose on a machine. On the other hand, there were a few others who knew what they were doing.
Well if a machinist with your less than adequate grasp of materials came into my shop looking for a job, I very truthfully wouldn't hire him regardless of their ability to run CNC machinery.
chazmo

San Antonio, TX

#256399 Jun 13, 2013
RADEKT wrote:
Iraq targets 4.5 million barrels a day for 2014
By Sinan Salaheddin, Associated Press |
BAGHDAD (AP)-- A senior Iraqi official on Wednesday said his country expects to ramp up oil production to 4.5 million barrels per day by the end of next year from around 3.5 million barrels now, thanks to work by a handful of international oil companies developing the country's prized oil and gas fields.
The chairman of the prime minister's advisory commission, Thamir Ghadhban, also said that resource-rich Iraq, which sits atop the world's fourth largest proven reserves of conventional crude, is also aiming to produce 9 million barrels a day by 2020.
Oil revenues make up 95 percent of the country's budget.
I THOUGHT TIMESTWIT SAID THE US WAS STEALING ALL OF IRAQ'S OIL !?!?!?!?!?
LOL

Apparently...

Like many statements regarding the evil whitie Americans...

It lacked truth...
chazmo

San Antonio, TX

#256400 Jun 13, 2013
onemale wrote:
<quoted text>
If you melt steel in a machine shop, you done fu_ ked up
And yet it can be done simply using steel, velocity and pressure...

Since: Jan 11

Cold Spring Harbor, NY

#256401 Jun 13, 2013
I have half a brain and I know 9/11 was an inside job

Since: Aug 11

Location hidden

#256406 Jun 13, 2013
onemale wrote:
<quoted text>
What is your point???
I never claimed to be an expert building demolition,
and you are not an expert either.
But unlike you I listen to experts.
The point is you listen to ignoramuses who also know nothing about building demolition but make all kinds of speculative claims.

“Roger is my favorite Wabbit”

Since: Jun 07

Dorchester , MA

#256407 Jun 13, 2013
onemale wrote:
<quoted text>
You're showing your ignorance again, a machinist doesn't melt steel and I never claimed to be a physicist.
So as a machinist...

You would be familiar with a lathe...

Also known as a spinnie thingie...

On this spinnie thingie...

One places/secures a piece of stock (steel/wood) that one intends to 'turn' down to a specific measurement...

Metal frequently starts out either square or round...matters not to the 'spinifying machine'

This is spun up to speed...variable depending on the stock used

Let's call this 'spinifying the stuff'...

Since I do not want to appear ignorant...

Do you have a word for the cutty thingie that actually removes the metal from the spinifying stuff?...

That spinifying stuff is spinifying at some velocity...

That cutty thingie is pressed against the spinifying stuff at some particular pressure...

This creates mucho heatifying stuff...

You can spray oil on to reduce the heat and prevent the METAL from heating to the point of MELTING...

And amazingly...

This was done to steel simply with velocity and pressure...

“Roger is my favorite Wabbit”

Since: Jun 07

Dorchester , MA

#256408 Jun 13, 2013
WasteWater wrote:
<quoted text>
Like armchair "experts" with no field experience talking about building demolitions. So true, so true.
Heeeyyyy...

I'm one of those armchair experts...

:-)

“Roger is my favorite Wabbit”

Since: Jun 07

Dorchester , MA

#256410 Jun 13, 2013
onemale wrote:
<quoted text>
Either way a physicist know more about physics than you, I and most likely everyone reading this combined.
Do all physicists agree with your speculations?...

Remember...

There was a Nuke detonation at Bikini Atoll...

Castle Bravo I think it was...

I'll find the link and post...

Physicists all calculated the yield of the blast...

Expecting 4-6 Megatons...

Actual yield...15 Megatons

It was not a good thing...

http://en.wikipedia.org/wiki/Castle_Bravo

How about those physicists that second guessed the engineers and blew up the Challenger?...

Over a temperature disagreement and the effects of that on 'neoprene' resiliency...

Columbia?...

Rather than check for damage...

They allowed the crew to burn up on reentry...

“Twoof, a true act of ignorance”

Since: Jun 09

Canada

#256411 Jun 14, 2013
chazmo wrote:
<quoted text>So as a machinist...

You would be familiar with a lathe...

Also known as a spinnie thingie...

On this spinnie thingie...

One places/secures a piece of stock (steel/wood) that one intends to 'turn' down to a specific measurement...

Metal frequently starts out either square or round...matters not to the 'spinifying machine'

This is spun up to speed...variable depending on the stock used

Let's call this 'spinifying the stuff'...

Since I do not want to appear ignorant...

Do you have a word for the cutty thingie that actually removes the metal from the spinifying stuff?...

That spinifying stuff is spinifying at some velocity...

That cutty thingie is pressed against the spinifying stuff at some particular pressure...

This creates mucho heatifying stuff...

You can spray oil on to reduce the heat and prevent the METAL from heating to the point of MELTING...

And amazingly...

This was done to steel simply with velocity and pressure...
:-)
Anonymous

Yanai, Japan

#256412 Jun 14, 2013
WasteWater wrote:
<quoted text>
Like armchair "experts" with no field experience talking about building demolitions. So true, so true.
My favorite armchair experts are those that know how historical events and wars 40+ years ago could've changed and were preventable. Typically this is when a person with common sense interjects with reasonable facts. There was no social media back then, no computers or internet. The basics were telephone, letter mail, and typewriting messages(including codebreaking). All that before even saying, hindsight is always 20/20!
Anonymous

Yanai, Japan

#256413 Jun 14, 2013
chazmo wrote:
<quoted text>
Heeeyyyy...
I'm one of those armchair experts...
:-)
Please read my last.

In theory, everyone on here is an armchair expert to a certain extent.:)

Since: Aug 11

Location hidden

#256414 Jun 14, 2013
chazmo wrote:
<quoted text>
Heeeyyyy...
I'm one of those armchair experts...
:-)
I was referring too the ones who use their degrees to promote nonsense. If you sit on a jury, you will see them.

Since: Aug 11

Location hidden

#256415 Jun 14, 2013
Anonymous wrote:
<quoted text>
My favorite armchair experts are those that know how historical events and wars 40+ years ago could've changed and were preventable. Typically this is when a person with common sense interjects with reasonable facts. There was no social media back then, no computers or internet. The basics were telephone, letter mail, and typewriting messages(including codebreaking). All that before even saying, hindsight is always 20/20!
Exactly!!! The factors present at the time determined the outcome. Hindsight is insanity.
Charlie Sheen

Lincoln, NE

#256416 Jun 14, 2013
LOL, My vote for post of the month.
chazmo wrote:
<quoted text>
So as a machinist...
You would be familiar with a lathe...
Also known as a spinnie thingie...
On this spinnie thingie...
One places/secures a piece of stock (steel/wood) that one intends to 'turn' down to a specific measurement...
Metal frequently starts out either square or round...matters not to the 'spinifying machine'
This is spun up to speed...variable depending on the stock used
Let's call this 'spinifying the stuff'...
Since I do not want to appear ignorant...
Do you have a word for the cutty thingie that actually removes the metal from the spinifying stuff?...
That spinifying stuff is spinifying at some velocity...
That cutty thingie is pressed against the spinifying stuff at some particular pressure...
This creates mucho heatifying stuff...
You can spray oil on to reduce the heat and prevent the METAL from heating to the point of MELTING...
And amazingly...
This was done to steel simply with velocity and pressure...
onemale

Tower Hill, IL

#256417 Jun 14, 2013
The cutting tool you are referring to is called a carbide insert.
Carbide is the hardest metal known to mankind, therefore it is brittle so it is mixed with drill rod, commonly referred as high speed tooling.
We didn't use oil, it smokes too much, we used what was called coolant, it was an oil that mixed with water and didn't put off smoke.
The terminology of velocity is never used, it is called surface feed, which is the correct speed and feed for the type of tooling you are using, so we won't melt or weld steel.
chazmo wrote:
<quoted text>
So as a machinist...
You would be familiar with a lathe...
Also known as a spinnie thingie...
On this spinnie thingie...
One places/secures a piece of stock (steel/wood) that one intends to 'turn' down to a specific measurement...
Metal frequently starts out either square or round...matters not to the 'spinifying machine'
This is spun up to speed...variable depending on the stock used
Let's call this 'spinifying the stuff'...
Since I do not want to appear ignorant...
Do you have a word for the cutty thingie that actually removes the metal from the spinifying stuff?...
That spinifying stuff is spinifying at some velocity...
That cutty thingie is pressed against the spinifying stuff at some particular pressure...
This creates mucho heatifying stuff...
You can spray oil on to reduce the heat and prevent the METAL from heating to the point of MELTING...
And amazingly...
This was done to steel simply with velocity and pressure...
Charlie Sheen

Lincoln, NE

#256418 Jun 14, 2013
onemale wrote:
We didn't use oil, it smokes too much, we used what was called coolant, it was an oil that mixed with water and didn't put off smoke.
So you didn't use oil, but you did?

“Twoof, a true act of ignorance”

Since: Jun 09

Canada

#256419 Jun 14, 2013
Charlie Sheen wrote:
<quoted text>So you didn't use oil, but you did?
Technically it's a cutting fluid and not an oil but its purpose is exactly what chazmo was getting at.
Charlie Sheen

Lincoln, NE

#256420 Jun 14, 2013
Porkpie Hat wrote:
<quoted text>
Technically it's a cutting fluid and not an oil but its purpose is exactly what chazmo was getting at.
So it's not oil and water?

Since: Aug 11

Location hidden

#256421 Jun 14, 2013
Charlie Sheen wrote:
<quoted text>
So it's not oil and water?
That depends upon what material is being machined.
onemale

Tower Hill, IL

#256422 Jun 14, 2013
Charlie Sheen wrote:
<quoted text>
So you didn't use oil, but you did?
I forgot I'm dealing with the mentally disabled here.
Okay we didn't use straight oil.

Tell me when this thread is updated:

Subscribe Now Add to my Tracker

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Top Stories Discussions

Title Updated Last By Comments
Why Australians should fear Muslims? (Feb '15) 1 hr AussieBobby 59
The Christian Atheist debate (Jun '15) 1 hr Thinking 92,637
Jehovah's Witnesses are true disciple of Jesus ... (Mar '07) 2 hr AussieBobby 46,038
Israel End is Near (Feb '15) 2 hr Jake999 1,095
Why I’m no longer a Christian (Jul '08) 4 hr CasinoJoe 445,570
Prove there's a god. (Mar '08) 7 hr Gabriel 979,423
Adventure Jeeps in Clarkesville went out of bus... (May '13) 8 hr littlemama101 5
News Roman Catholic church only true church, says Va... (Jul '07) 8 hr LAWEST100 667,843
More from around the web