locksmith van for sale
retiring

Saint Louis, MO

#1 Jul 17, 2008
Fully loaded with new code machine.
jeff adams

New Carlisle, IN

#2 Sep 10, 2009
used locksmith van
The Lock Doctor

Middletown, DE

#3 Dec 9, 2009
What price are you looking to get for your van??

[email protected]
Adam

Homewood, IL

#4 Feb 19, 2010
jeff adams wrote:
used locksmith van
Is the Van still available? If so what is price? [email protected]
Adam

Homewood, IL

#5 Feb 19, 2010
retiring wrote:
Fully loaded with new code machine.
starting a mobile locksmith business in illinois,is your van still available??
LOCKSMITH van for SALE

Rancho Cucamonga, CA

#6 Jul 31, 2010
Please contact me at [email protected]
VAN 2003 Chevy V8
fully loaded with locksmith tools
terry

AOL

#7 Aug 29, 2010
Iam looking to buy code machine used for my business are you selling any equipment.please contact me if you are. thanks [email protected] O.COM
James

Virginia Beach, VA

#8 Oct 13, 2010
To Whom it May Concern:

My father passed and I am selling what is left of his locksmith equipment.

SDC Micro Shear Emlocks 1561 &1562

ASSA 1-1/8" Mortise Rim Cyl Twin

ASSA Precoded Key Blanks

Simplex Locks and lock parts

Lsda lever sets

Lsda Grade 1 and 2

Lsda Key blanks

Rim Cylinder :Lsda, medco, schlage, sergant, key west, falcon

Keys for all the above

More high security locks just need to gauge interest before I
inventory and send pictures...

Complete set of Ford Tryout Keys (Jigglers)

This set of tryout keys are designed for FORD model cars from 1985 to
date. They will operate door and ignition. New 10 cut H60 key blanks.
There are a total of 135 keys per set. Not designed to work on VATS
system.

3 Piece extractor scissor set
3 Piece extractor set
Broken key extractor set
Key blanks
Transponders

47 pc. COMPLETE Auto Opening KIT
Complete Auto Lockout Tool Kit. This 47-piece auto-opening kit
contains 1 each of our car opening tools; 5 Slim Jims, 7 M.C.O.T.
tools, a Long Reach Tool and all of our specialty tools.

Ignitions
GM Decoder
GM and ALL American Make Try out Keys

Unigaurd Ignition Key-Probe interrogator

VATS Reader and lots lots more and LOTS MORE!!!

Duplicaters (Ilco automatic)

Framon #2 code machine:

Accuracy: All Framon key machines are hand assembled and hand fit.
This ensures that before your machine reaches you, it has originated
keys accurate to one-half thousandth of an inch (.0005", about the
thickness of a hair). This tolerance assures a perfect key every time!

Straight-In Feed: The #2 utilizes a straight-in feed approach. The
straight-in feed of the #2 provides a perpendicular cut at the root of
the key. The flat of the cut will always be the same depth from the
left side of the cut to the right. Machines that use a pivot approach
can produce keys that turn one way but not the other. The drawing at
the right shows the profile of a key cut by a machine that pivots. The
different shear lines from the left to the right side of the key lead
to the turning problem.

Rugged & Durable: The #2 is made from heat treated aluminum and steel.
The carriage moves forward on a pair of steel slides. Spacing and
depth movements take place on pairs of steel pins and screws. There
are no small gears to strip out and no plastic parts to wear out.
We've heard plenty of stories from code machine owners who have
dropped the machine off of their workbench and cut a key with no
adjustments needed!

Cutting Keys By Measurement.....Unequalled Accuracy & Simple To Do

The #2 utilizes actual space & depth information to cut keys. Here's
how it's done.....

Mfgr: Schlage Depths
Series: Pin Tumbler 0-.335
Blanks: 1045C, etc. 1-.320
Cuts Start At:.231 2-.305
Spacing:.156 3-.290
Block #: 1 4-.275
Incr.:.015 5-.260
No. Of Spaces: 5 or 6 6-.245
Spaces:.231,.387,.543,.699,.85 5,
8-.215
9-.200

SPACING: To cut a key, you need two dimensions: starting cut (distance
from the shoulder to the first cut) and spacing (distance between cuts
thereafter), both found in the Depth & Space Manual. Shown at the
right is the Schlage chart from our Depth & Space Manual. Schlage
cylinder keys use .231" starting cut and .156" spacing. Starting cut
is set by zeroing the machine and counting out to .231". Once set, the
the spacing block with .156" is aligned. Cut to cut spacing is a
simple matter of aligning two index marks.

DEPTH: Depth settings are made in .001" increments by means of a
micrometer. Reading a micrometer is quite simple - the depth
micrometer on the #2 Code Machine is shown to the left. The micrometer
depth reading is what gives the #2 its' extreme accuracy. Once
familiar with the machine, you'll be code cutting keys in 30-45
seconds.

High security LSDA locks and lock parts

Keyed ignitions

Pick Sets

MUCH MORE!!

Everything a business would need

If you are interested email me [email protected]

James
James

Virginia Beach, VA

#9 Oct 13, 2010
To Whom it May Concern:

My father passed and I am selling what is left of his locksmith equipment.

SDC Micro Shear Emlocks 1561 &1562

ASSA 1-1/8" Mortise Rim Cyl Twin

ASSA Precoded Key Blanks

Simplex Locks and lock parts

Lsda lever sets

Lsda Grade 1 and 2

Lsda Key blanks

Rim Cylinder :Lsda, medco, schlage, sergant, key west, falcon

Keys for all the above

More high security locks just need to gauge interest before I
inventory and send pictures...

Complete set of Ford Tryout Keys (Jigglers)

This set of tryout keys are designed for FORD model cars from 1985 to
date. They will operate door and ignition. New 10 cut H60 key blanks.
There are a total of 135 keys per set. Not designed to work on VATS
system.

3 Piece extractor scissor set
3 Piece extractor set
Broken key extractor set
Key blanks
Transponders

47 pc. COMPLETE Auto Opening KIT
Complete Auto Lockout Tool Kit. This 47-piece auto-opening kit
contains 1 each of our car opening tools; 5 Slim Jims, 7 M.C.O.T.
tools, a Long Reach Tool and all of our specialty tools.

Ignitions
GM Decoder
GM and ALL American Make Try out Keys

Unigaurd Ignition Key-Probe interrogator

VATS Reader and lots lots more and LOTS MORE!!!

Duplicaters (Ilco automatic)

Framon #2 code machine:

Accuracy: All Framon key machines are hand assembled and hand fit.
This ensures that before your machine reaches you, it has originated
keys accurate to one-half thousandth of an inch (.0005", about the
thickness of a hair). This tolerance assures a perfect key every time!

Straight-In Feed: The #2 utilizes a straight-in feed approach. The
straight-in feed of the #2 provides a perpendicular cut at the root of
the key. The flat of the cut will always be the same depth from the
left side of the cut to the right. Machines that use a pivot approach
can produce keys that turn one way but not the other. The drawing at
the right shows the profile of a key cut by a machine that pivots. The
different shear lines from the left to the right side of the key lead
to the turning problem.

Rugged & Durable: The #2 is made from heat treated aluminum and steel.
The carriage moves forward on a pair of steel slides. Spacing and
depth movements take place on pairs of steel pins and screws. There
are no small gears to strip out and no plastic parts to wear out.
We've heard plenty of stories from code machine owners who have
dropped the machine off of their workbench and cut a key with no
adjustments needed!

Cutting Keys By Measurement.....Unequalled Accuracy & Simple To Do

The #2 utilizes actual space & depth information to cut keys. Here's
how it's done.....

Mfgr: Schlage Depths
Series: Pin Tumbler 0-.335
Blanks: 1045C, etc. 1-.320
Cuts Start At:.231 2-.305
Spacing:.156 3-.290
Block #: 1 4-.275
Incr.:.015 5-.260
No. Of Spaces: 5 or 6 6-.245
Spaces:.231,.387,.543,.699,.85 5,
8-.215
9-.200

SPACING: To cut a key, you need two dimensions: starting cut (distance
from the shoulder to the first cut) and spacing (distance between cuts
thereafter), both found in the Depth & Space Manual. Shown at the
right is the Schlage chart from our Depth & Space Manual. Schlage
cylinder keys use .231" starting cut and .156" spacing. Starting cut
is set by zeroing the machine and counting out to .231". Once set, the
the spacing block with .156" is aligned. Cut to cut spacing is a
simple matter of aligning two index marks.

DEPTH: Depth settings are made in .001" increments by means of a
micrometer. Reading a micrometer is quite simple - the depth
micrometer on the #2 Code Machine is shown to the left. The micrometer
depth reading is what gives the #2 its' extreme accuracy. Once
familiar with the machine, you'll be code cutting keys in 30-45
seconds.

High security LSDA locks and lock parts

Keyed ignitions

Pick Sets

MUCH MORE!!

Everything a business would need

If you are interested give email me [email protected]

James

“Dont hateME cause my car's HOT”

Since: Sep 07

St Louis Missouri

#10 Oct 15, 2010
Wow a few post down someone is looking for a Locksmith Van involved in a hit and run on hwy 270.That's odd..

“Dont hateME cause my car's HOT”

Since: Sep 07

St Louis Missouri

#11 Oct 15, 2010
Never mind this post started in "08"
delano rogers

Union, NJ

#12 Oct 21, 2010
what price were asking for your key machine contact me if it isnt sold
Tim 5756310709

Lovington, NM

#15 Feb 10, 2012
James wrote:
To Whom it May Concern:
My father passed and I am selling what is left of his locksmith equipment.
SDC Micro Shear Emlocks 1561 &1562
ASSA 1-1/8" Mortise Rim Cyl Twin
ASSA Precoded Key Blanks
Simplex Locks and lock parts
Lsda lever sets
Lsda Grade 1 and 2
Lsda Key blanks
Rim Cylinder :Lsda, medco, schlage, sergant, key west, falcon
Keys for all the above
More high security locks just need to gauge interest before I
inventory and send pictures...
Complete set of Ford Tryout Keys (Jigglers)
This set of tryout keys are designed for FORD model cars from 1985 to
date. They will operate door and ignition. New 10 cut H60 key blanks.
There are a total of 135 keys per set. Not designed to work on VATS
system.
3 Piece extractor scissor set
3 Piece extractor set
Broken key extractor set
Key blanks
Transponders
47 pc. COMPLETE Auto Opening KIT
Complete Auto Lockout Tool Kit. This 47-piece auto-opening kit
contains 1 each of our car opening tools; 5 Slim Jims, 7 M.C.O.T.
tools, a Long Reach Tool and all of our specialty tools.
Ignitions
GM Decoder
GM and ALL American Make Try out Keys
Unigaurd Ignition Key-Probe interrogator
VATS Reader and lots lots more and LOTS MORE!!!
Duplicaters (Ilco automatic)
Framon #2 code machine:
Accuracy: All Framon key machines are hand assembled and hand fit.
This ensures that before your machine reaches you, it has originated
keys accurate to one-half thousandth of an inch (.0005", about the
thickness of a hair). This tolerance assures a perfect key every time!
Straight-In Feed: The #2 utilizes a straight-in feed approach. The
straight-in feed of the #2 provides a perpendicular cut at the root of
the key. The flat of the cut will always be the same depth from the
left side of the cut to the right. Machines that use a pivot approach
can produce keys that turn one way but not the other. The drawing at
the right shows the profile of a key cut by a machine that pivots. The
different shear lines from the left to the right side of the key lead
to the turning problem.
Rugged & Durable: The #2 is made from heat treated aluminum and steel.
The carriage moves forward on a pair of steel slides. Spacing and
depth movements take place on pairs of steel pins and screws. There
are no small gears to strip out and no plastic parts to wear out.
We've heard plenty of stories from code machine owners who have
dropped the machine off of their workbench and cut a key with no
adjustments needed!
Cutting Keys By Measurement.....Unequalled Accuracy & Simple To Do
The #2 utilizes actual space & depth information to cut keys. Here's
how it's done.....
Mfgr: Schlage Depths
Series: Pin Tumbler 0-.335
Blanks: 1045C, etc. 1-.320
Cuts Start At:.231 2-.305
Spacing:.156 3-.290
Block #: 1 4-.275
Incr.:.015 5-.260
No. Of Spaces: 5 or 6 6-.245
Spaces:.231,.387,.543,.699,.85 5,
8-.215
9-.200
SPACING: To cut a key, you need two dimensions: starting cut (distance
from the shoulder to the first cut) and spacing (distance between cuts
thereafter), both found in the Depth & Space Manual. Shown at the
right is the Schlage chart from our Depth & Space Manual. Schlage
cylinder keys use .231" starting cut and .156" spacing. Starting cut
is set by zeroing the machine and counting out to .231". Once set, the
the spacing block with .156" is aligned. Cut to cut spacing is a
simple matter of aligning two index marks.
DEPTH: Depth settings are made in .001" increments by means of a
micrometer. Reading a micrometer is quite simple - the depth
micrometer on the #2 Code Machine is shown to the left. The micrometer
depth reading is what gives the #2 its' extreme accuracy. Once
familiar with the machine, you'll be code cutting keys in 30-45
seconds.
High security LSDA locks and lock parts
Keyed ignitions
Pick Sets
MUCH MORE!!
Everything a business would need
If you are interested email me [email protected]
James
. HAS THIS SOLD
Don

San Diego, CA

#16 Sep 8, 2012
retiring wrote:
Fully loaded with new code machine.
Is truck still for sale? How much? What are details. Type truck,miles,equipment included. [email protected]
Don

San Diego, CA

#17 Sep 8, 2012
jeff adams wrote:
used locksmith van
How much type truck miles equipment included. [email protected]
Van Man

Saint Louis, MO

#18 Sep 8, 2012
they can't find the keys to the van
snockered

United States

#19 Sep 8, 2012
You fecking morons, look at the dates.
Don

San Diego, CA

#20 Sep 9, 2012
snockered Thanks I am the moron. Didn't realize old posts would still be listed. Need to pay better attention. Won't bother with this site if it does not clean up posts.
one for the record books

Irving, TX

#21 Sep 10, 2012
Don wrote:
snockered Thanks I am the moron. Didn't realize old posts would still be listed. Need to pay better attention. Won't bother with this site if it does not clean up posts.
Why not just try C.L.?? Duh.

Tell me when this thread is updated:

Subscribe Now Add to my Tracker

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

St. Louis Discussions

Title Updated Last By Comments
His Wife Has Boyfriends All Over Metro 2 hr Back Again 6
Kellogg's Boycott - Donated Millions to BLM 2 hr Back Again 4
LMAO! Facebook Caught in More Lies. 9 hr Dunno 1
Blk Thugs Shooting White again on MetroLink 11 hr Back Again 7
Coalburner at Adams elementary Thu BLMNOT 4
Is the phrase "once you go black you never go b... (Jan '11) Thu BLMNOT 294
Is downtown area safe for a single girl to visit Thu Really 18

St. Louis Jobs

More from around the web

Personal Finance

St. Louis Mortgages