Help with Formula Ventures BodyTech machine

[cmyers]

I was given a BodyTech (by Formula Ventures which doesn't seem to be in business any longer) weight machine, but I don't have an owner's manual or any documentation with it. The model number is 95300-15. It looked like a pile of scrap metal when I got it, but I've managed to piece together the major components. A couple of the cables were cut when it was disassembled (I didn't see it until it looked like a pile of scrap metal), so I'll have to make a couple cables to replace them. The problem is that I have no clue how the cables & pulleys are supposed to be configured.

Anyone have a machine like this that could show me pictures or maybe suggestions as to where I might be able to get a copy of the owner's manual or assembly instructions? It has 2 weight stacks and 4 stations.

Thanks,
cm

[Casey]

I recieved one in the same condition and it took me a total of 4 1/2 hours just re-routing the pullies until they worked my machine is made by the same company Formula Ventures but its the 970 Dual Stack System think some pics of it would help?

[Justin morgan]

Casey wrote:

I recieved one in the same condition and it took me a total of 4 1/2 hours just re-routing the pullies until they worked my machine is made by the same company Formula Ventures but its the 970 Dual Stack System think some pics of it would help?

I'm in the same boat as the other guy, and pictures would help me a ton.

[Bob]

cmyers wrote:

I was given a BodyTech (by Formula Ventures which doesn't seem to be in business any longer) weight machine, but I don't have an owner's manual or any documentation with it. The model number is 95300-15. It looked like a pile of scrap metal when I got it, but I've managed to piece together the major components. A couple of the cables were cut when it was disassembled (I didn't see it until it looked like a pile of scrap metal), so I'll have to make a couple cables to replace them. The problem is that I have no clue how the cables & pulleys are supposed to be configured.
Anyone have a machine like this that could show me pictures or maybe suggestions as to where I might be able to get a copy of the owner's manual or assembly instructions? It has 2 weight stacks and 4 stations.
Thanks,
cm

Any pictures? I have the same situation.

[Tom]

I have the same problem I have a venture gym 90650 and all the pieces but no instruction manual

[ray]

Casey wrote:

I recieved one in the same condition and it took me a total of 4 1/2 hours just re-routing the pullies until they worked my machine is made by the same company Formula Ventures but its the 970 Dual Stack System think some pics of it would help?

i also bought a body tech 4 station dual stack machine and have not figured out how to route the pulleys . has anyone done a diagram or have pictures ?

[Bill]

My neighbor has one, all assembled and never used. Tell me where the model ID number is, and if it's the same one you have, I'll share pix or video

[Michael]

I have one of these gyms assembled and not been used for a while. It is hooked up. Model #94800-10 Vendor ID# 890100. I think it was from Price Club/Costco. Anyway once i can get some pic I can send them over.

[Rob]

Michael wrote:

I have one of these gyms assembled and not been used for a while. It is hooked up. Model #94800-10 Vendor ID# 890100. I think it was from Price Club/Costco. Anyway once i can get some pic I can send them over.

Please send pics this is the one I have. Thanks!

[Rob]

Bill wrote:

My neighbor has one, all assembled and never used. Tell me where the model ID number is, and if it's the same one you have, I'll share pix or video

It's on the back part of the chair or bench.

[Lee]

Michael wrote:

I have one of these gyms assembled and not been used for a while. It is hooked up. Model #94800-10 Vendor ID# 890100. I think it was from Price Club/Costco. Anyway once i can get some pic I can send them over.

Dear Michael,
Do you have any pictures of BodyTech? I bought my Model 94800-10 at a garage sale and I would love to see how the cables and pulleys are arranged.
Please send pictures to [e-mail] Thank you very much for your help!!

[Joanne]

Lee or Michael -- We're trying to put one of these together, too. If there are some photos available, they would be greatly appreciated. Send to [e-mail]. Thanks!

[martilin]

can anybody out there please send a pic. of the formula ventures axis avital mach. the customer service number is no longer in service bought at yard sale and cant put back together. any pics of any models would be greatly appreciated.

thank you
have a great day!
[e-mail]

[kevin]

I just posted some photos of my bodytech 94800-10 here:

http://www.goattack.com/bodytech/94800-10.htm...

I hope they are helpful. I'd like to see photos of your completed gyms, just to make sure mine isn't missing any parts- though it does appear to be complete. I'd also like to see how others are getting a shoulder workout completed on this gym. The only thing I'm coming up with are exercises that use the low cable.

[e-mail]

[Shannon]

Casey wrote:

I recieved one in the same condition and it took me a total of 4 1/2 hours just re-routing the pullies until they worked my machine is made by the same company Formula Ventures but its the 970 Dual Stack System think some pics of it would help?

In the same boat. Pics would be a great deal of help, if you have thwem

[nick]

cmyers wrote:

I was given a BodyTech (by Formula Ventures which doesn't seem to be in business any longer) weight machine, but I don't have an owner's manual or any documentation with it. The model number is 95300-15. It looked like a pile of scrap metal when I got it, but I've managed to piece together the major components. A couple of the cables were cut when it was disassembled (I didn't see it until it looked like a pile of scrap metal), so I'll have to make a couple cables to

replace them. The problem is that I have no clue how the cables & pulleys are supposed to be configured.
Anyone have a machine like this that could show me pictures or maybe suggestions as to where I might be able to get a copy of the owner's manual or assembly instructions? It has 2 weight stacks and 4 stations.
Thanks,
cm

Hi I have one myself. I could send pictures of mine. I would like to know the value of one of these things as I was given mine.
Nick at [e-mail]

[nick]

I was given one of these machines. What is the new price for one. I can send pics of the details in exchange for this ingo
Nick at [e-mail]

[john]

Casey wrote:

I recieved one in the same condition and it took me a total of 4 1/2 hours just re-routing the pullies until they worked my machine is made by the same company Formula Ventures but its the 970 Dual Stack System think some pics of it would help?

Sure could take a look at your pic's guy!

[john]

can i see your Pic's Pleaseee

[Michelle]

I also have the 94800-10. Could someone who has a manual tell me where I can get one. It was free, but completely disassembled. [e-mail]