Boot sequence on IBM PC300GL and 300PL

[David]

Hallo, I have some problems with the boot sequence on my IBM PC 300PL and 300GL, at the moment there are windows 95 installed, but I want Ubuntu installed there are CD-rom drive in it, but I can't figure out how to boot up on the CD-rom drive, any idea?
Sincerely
David

[omni]

Hallo, I have some problems with the boot sequence on my IBM PC 300PL and 300GL, at the moment there are windows 95 installed, but I want Ubuntu installed there are CD-rom drive in it, but I can't figure out how to boot up on the CD-rom drive, any idea?
Sincerely

[omni]

Hallo, I have some problems with the boot sequence on my IBM PC 300PL and 300GL, at the moment there are windows 95 installed, but I want Ubuntu installed there are CD-rom drive in it, but I can't figure out how to boot up on the CD-rom drive, any idea?
Sincerely
omni

[Mark Ward]

Hello, I am trying to boot from the
CD-ROM on a IBM PC 300 PL, however, I can't figure out how to boot from the CR-ROM . I tryed:: Upgrade my BIOS, Create a new partition, and a few other trick that I know. Nothing works. Please advise. Thank you . MOW.

[Ace Ajax]

ftp://ftp.software.ibm.com/pc/ pccbbs/commercial_desktop/37l2 165-3.pdf How to change your boot sequence

[tricky header]

problems with the boot sequence on my IBM PC 300PL
I have Win98, but your BIOS may be the same. F1 during boot, then Start Options. The top line says (dot) Startup Sequence. THIS IS NOT THE PAGE HEADER! It has further options when you hit Enter.

[Jerry B]

Thank you Tricky Header. The elusive Start up Sequence was not very evident.

[Kim PA]

Thank you, thank you. Just the information I needed and could not find.

[khalid]

i got startup option from the bios, first press f1 key, then go startup opton,then press enter, you can see cd rom, hdd, more, enjoy

[alhassan]

when i switch on,i can see the system boot, but the monitor can't display nothing.

[alhassan]

when i switch on the pc,i can see the system boot, but the monitor can't display anything.

[JohnMcB]

I have 2000 Pro. When I boot up I get a message: "176 The system has been tampered with. Turn power to your system off then on. Your system is now locked." How do I unlock this?

[apaez]

DUDE i know this pc is some what old. But i was at it for liek an hour untill i read the posts from tricky header. I cant belive i missed that lol

[Pat]

alhassan wrote:

when i switch on,i can see the system boot, but the monitor can't display nothing.

Try unplugging it for 30 seconds and plug it back in...

[Pat]

JohnMcB wrote:

I have 2000 Pro. When I boot up I get a message: "176 The system has been tampered with. Turn power to your system off then on. Your system is now locked." How do I unlock this?

Try unplugging it for about 30 seconds and then plug it back in...I believe it has a CMOS jumper on the MB that you can clear it with...If all else fails, unplug it and take the CMOS battery out (it looks like a watch battery) and leave it out for a while...then put it back in...normally you'll have to reset your date and time....

[Pat]

alhassan wrote:

when i switch on the pc,i can see the system boot, but the monitor can't display anything.

Try unplugging it for 30 seconds and plug it back in...

[Tux]

i put the boot disk but the CD ROM cannot pick it

[Anonymous]

Jerry B wrote:

Thank you Tricky Header. The elusive Start up Sequence was not very evident.

Thanks! How odd!

[GMDDA]

Dear Mark Ward (or others) did you manage to boot you IBM300PL fron CD and if so how did you manage it? Thanks

[Jose Vizcaino]

khalid wrote:

i got startup option from the bios, first press f1 key, then go startup opton,then press enter, you can see cd rom, hdd, more, enjoy

I tried this solution on my IBM 300pl 6565u and it did not work. Can you help.

Jose