Ansys 12 crack on WinXp
Cautivus

Valencia, Spain

#64 Jan 31, 2011
I have the same failure:
"specified in license preferences is not available"
What should i do?
tharan

Kuala Lumpur, Malaysia

#65 Feb 9, 2011
In my windows 7 x64 installation I discovered that user rights is preventing the license manager from starting.I had run anslic_admin.exe in C:\Program Files\ANSYS Inc\Shared Files\Licensing\winx64 as administrator manually before I am able to use my Ansys 12. Hope it works for you too...
tharan

Kuala Lumpur, Malaysia

#66 Feb 9, 2011
In my windows 7 x64 installation I discovered that user rights is preventing the license manager from starting.I had run anslic_admin.exe in C:\Program Files\ANSYS Inc\Shared Files\Licensing\winx64 as administrator and then Start the ANSYS, Inc. License Manager before I am able to use my Ansys 12. Hope it works for you too
Marc

Erding, Germany

#67 Feb 13, 2011
I managed to install a valid license and get the LICENSING INTERCONNECT and the FLEXLM to run (it says so in the 'Server ANSLC_ADMIN Utility'.

Too, I changed the port 1055 to 1056 (as I have ProE installed, using FLEXlm too) and changed 2325 to 2326. These ports are changed everywhere (license.dat, ansyslmd.ini).

But everytime I start ANSYS 13 Workbench, I get the following error:

Could not connect to any license server.
The server is down or is not responsive.
ANSYSLI_SERVERS: [email protected]
FLEXlm Servers: [email protected]

ZoneAlarm completely turned off, didn't change a thing, I still get the error, even after reboots.

Any ideas ?
Senthil

Chennai, India

#68 Feb 19, 2011
Thanks john
john wrote:
After Installation of ANSYS 12.0, including license manager
1# Run the (ap120_calc.exe), to generate the license file,(license.dat)
NOTE: Both files (ansys.dat and license.dat), they have to be the same.
2# Place both files under (C:\Program Files\ANSYS Inc\Shared Files\Licensing).
3# Change the first line (SERVER host 000000000000 1055) with your Host Name
and physical IP address, e.g.(SERVER john 006098dec2ba 1055).
4# Open the file ansyslmd.ini , change the lines as follow:
LICKEYFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.dat
LICLOGFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.log
ANSYSLI_PORT=2325
[email protected]
[email protected]
5# Under C:\Program Files\ANSYS Inc\v120\fluent\license\ntx86 OR x64 RUN
The Client.exe, in the fields enter Host Name and port, 1055, the file should be:
SERVER john 00000000 1055
USE_SERVER
6# Run the Server ANSLIC_ADMIN Utility, and start the server.
AndySes

Chadstone, Australia

#71 Feb 27, 2011
Hi all, could someone email the ap120_calc.exe file for me please?

I really need it to get ANSYS working for my final year thesis. Any help would be really appreciated...

Thanks in advance!

Andy S

[email protected]
Veeresh

Bangalore, India

#75 Mar 29, 2011
Can anybody mail me the Licence File of ANSYS 12.0 Please if u having mail me at [email protected]
machine

Indonesia

#79 May 21, 2011
could you make me know
1. how to complete install ansys12 64-bit on win 7?
2. I am not understanding about license server, I am desperate when I install it, because it always "not started on your system", did I forgot some step before?
Ajeya

Bangalore, India

#80 Jun 18, 2011
Hi. i successfully cracked the FLuent Ansys 12.0
First install the prerequisites and let the 98 packages to install. In the beginning check the box to skip that look for Pro-E or other if u dont have installed them.

Then the license part will begin.

Start>>Command Prompt

Type inconfig/all

It will display HOSTNAME.

Remember it and enter the same(CASE SENSITIVE) in the Host name box.

and the installation continue.

Now it would ask for the license manager to start.

Continue it and disable your antivirus. Then let the ap120_calc run. It will generate a license file.
Remember its path.

It the license manager go for the fisrt option ie DEFAULT. and select the license file generated.

Hopefully it would help u.

Bye..
Blankpoint

Barcelona, Spain

#81 Jul 5, 2011
Ajeya wrote:
Hi. i successfully cracked the FLuent Ansys 12.0
First install the prerequisites and let the 98 packages to install. In the beginning check the box to skip that look for Pro-E or other if u dont have installed them.
Then the license part will begin.
Start>>Command Prompt
Type inconfig/all
It will display HOSTNAME.
Remember it and enter the same(CASE SENSITIVE) in the Host name box.
and the installation continue.
Now it would ask for the license manager to start.
Continue it and disable your antivirus. Then let the ap120_calc run. It will generate a license file.
Remember its path.
It the license manager go for the fisrt option ie DEFAULT. and select the license file generated.
Hopefully it would help u.
Bye..
Thanks it really worked
Francis

Europe

#82 Aug 4, 2011
I can't get (ap120_calc.exe) file.where can I get this setup.plz send me the link to my mail
[email protected]
BJM

Tczew, Poland

#84 Dec 27, 2011
Hey Guys,
My Ansys 12 is shutting down after few minutes of work, and displays "SIG$BREAK" internal data corrupted". Please help.
indian

Vellore, India

#87 Feb 28, 2012
hi a am also suffering from similiar probs...... i am unable to open the ansys gen.....plz help me.......it shows the messaga that it can't be accessed......
avi

Bangalore, India

#89 Jul 3, 2012
i m not able to install ansys 12 please tell me complete procedure from starting for windows 7...help me....
kli

Chennai, India

#91 Sep 15, 2012
ouyeihywiunp wrahowo i wrhj l wghwr
] w hj h
Vladimir

Kuala Lumpur, Malaysia

#93 Feb 11, 2014
FOr those that cannot run ap_120calc, you must turn off your antivirus first to run that app and run it as admin
nikhil

Chennai, India

#94 Mar 10, 2014
Rakz wrote:
Hurray...
Got everythng.. now ansys working at its fullest
How did u get the licence
rame

Bidar, India

#95 May 3, 2014
rs
ddiablo

Durgapur, India

#96 Jan 5, 2015
kumarr wrote:
I am getting error like this
"The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
when trying to install ansys 12 license manager
Go to windows services and start the Ansys License Manager service.
Arjun

Chennai, India

#97 Jun 19, 2015
Issey wrote:
I have Failover feature 'ANSYS Multiphysics' specified in license preferences is not available.
What should i do?
did you find how to solve this?

Tell me when this thread is updated:

Subscribe Now Add to my Tracker

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

ANSYS Discussions

Title Updated Last By Comments
topology optimization code_ansys apdl May '17 ju_ange 1
ansys apdl_derivatives May '17 ju_ange 1
Ansys APDL- problem with spring Feb '17 Anonymous 2
Structural Calculation Jan '17 genry 1
ANSYS DesignModeler Jan '17 VSt12 1
Contraction test on ansys (Dec '16) Dec '16 bert 1
Where to find the cohesion value of metal in AN... (Jun '09) Dec '16 tuanpvan 2
More from around the web