Ansys 12 crack on WinXp

Ansys 12 crack on WinXp

Posted in the ANSYS Forum

First Prev
of 5
Next Last
Giulio

Rome, Italy

#1 Nov 2, 2009
I have created license.txt file using ap120_calc.exe
The file has the following structure :

SERVER "hostname" "FLEXID" 1055

[...]

I run ANSLIC_ADMIN utility and execute "install license file"

I have tried to install licens file more than one time and now read "Selected file is equivalent to exsisting licennsing file;license file non upgraded"

I can't understand if it's a good or wrong license file. However ,for example, if i launch fluent i read errore message about license.(i have also tried to copy license.dat file in fluent/license/ntx86 folder

where can i found a complete procedure?
Than you
pikoro

Celaya, Mexico

#2 Nov 16, 2009
i have a similar problem... i cant intall ansys 12... is there some guide to install Ansys 12?
thanks
niko

Glen Rose, TX

#3 Nov 16, 2009
Can someone please post a tutorial on how to installing?
Ganesh

Netherlands

#4 Dec 3, 2009
I had also same problem.
Just change the number 1055 to some other no. I tried 1056.And save the file with some other name.
Actually port 1055 is used by some other aplication so it doesnt work for Ansys.
Success.
Ganesh
firas

Frechen, Germany

#5 Jan 13, 2010
Can some body write the whole procedure how to install ansys 12
Thx
john

Toronto, Canada

#6 Jan 26, 2010
After Installation of ANSYS 12.0, including license manager
1# Run the (ap120_calc.exe), to generate the license file,(license.dat)
NOTE: Both files (ansys.dat and license.dat), they have to be the same.
2# Place both files under (C:\Program Files\ANSYS Inc\Shared Files\Licensing).
3# Change the first line (SERVER host 000000000000 1055) with your Host Name
and physical IP address, e.g.(SERVER john 006098dec2ba 1055).
4# Open the file ansyslmd.ini , change the lines as follow:
LICKEYFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.dat
LICLOGFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.log
ANSYSLI_PORT=2325
[email protected]
[email protected]
5# Under C:\Program Files\ANSYS Inc\v120\fluent\license\ntx86 OR x64 RUN
The Client.exe, in the fields enter Host Name and port, 1055, the file should be:
SERVER john 00000000 1055
USE_SERVER
6# Run the Server ANSLIC_ADMIN Utility, and start the server.
godou

Besanšon, France

#7 Jan 27, 2010
hello john
Like I installing ansys v12 on my computer.I checked all your procedure,It looks like ok but I don't know how you do to "start your serva "part 6".
When I reboot my laptop,a error message appears "Failover featture 'Ansys structural specified in licence preference is not available".

Maybe do you know where the problem comes from?
godou

Besanšon, France

#8 Jan 27, 2010
hello john
Like I installing ansys v12 on my computer.I checked all your procedure,It looks like ok but I don't know how you do to "start your serva "part 6".
When I reboot my laptop,a error message appears "Failover featture 'Ansys structural specified in licence preference is not available".

Maybe do you know where the problem comes from?

thanks bye
Sachin

Haverford, PA

#10 Feb 4, 2010
Hello, How can I get ANSYS Workbench s/w for personal use, I just have my laptop to install ANSYS. Can I get it for free from net (student version)or from ANSYS office in concessioned rate.

Thank you
KGF

Toronto, Canada

#11 Feb 6, 2010
Hey everyone,
I have followed this procedure and tried uninstalling and reinstalling ANSYS 12 several times now. Each time I follow the same procedure. However, I have learned:
1. You cannot use the following syntax in the ansyslmd.ini file:
LICKEYFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.dat
LICLOGFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.log
ANSYSLI_PORT=2325
[email protected]
[email protected]
Each time that I have tried this, and the followed the rest of the procedure, the License Manager would detect an invalid ansyslmd.ini file. I do not think that the first two lines are necessary since those paths are specified in ANSYS License Manager start-up options.
2. Anyway, each time that I attempt to run ANSYS Workbench after following the procedure, I get the following error message:
"Could not connect to local server: [email protected]"
I am going to try to change the 2325 ANSYS Licensing Interconnect Port Number to something else, another open/listening port available on my machine.
If anyone has had a similar problem and knows the solution, please advise. Thank you all for putting some information out there!
john wrote:
After Installation of ANSYS 12.0, including license manager
1# Run the (ap120_calc.exe), to generate the license file,(license.dat)
NOTE: Both files (ansys.dat and license.dat), they have to be the same.
2# Place both files under (C:\Program Files\ANSYS Inc\Shared Files\Licensing).
3# Change the first line (SERVER host 000000000000 1055) with your Host Name
and physical IP address, e.g.(SERVER john 006098dec2ba 1055).
4# Open the file ansyslmd.ini , change the lines as follow:
LICKEYFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.dat
LICLOGFIL=C:\PROGRA~1\ANSYSI~1 \SHARED~1\LICENS~1\license.log
ANSYSLI_PORT=2325
[email protected]
[email protected]
5# Under C:\Program Files\ANSYS Inc\v120\fluent\license\ntx86 OR x64 RUN
The Client.exe, in the fields enter Host Name and port, 1055, the file should be:
SERVER john 00000000 1055
USE_SERVER
6# Run the Server ANSLIC_ADMIN Utility, and start the server.
Fen

Canada

#12 Feb 7, 2010
Anyone can post the license file for ansys12.1?
Thanks
Harsh

Pune, India

#13 Feb 15, 2010
hi i'm not able to install the license file it says flexlm id doesn't match.

Previously i had installed & it was working good but now again i installed it and the license.txt generated doesn't match the flexlm host id of the system.

kindly help me with this issue.
thanks.
KGF

Toronto, Canada

#14 Feb 16, 2010
I had the same issue during installation. Resolved by

1.unistalling ANSYS WB and licensing completely then using "Registry First Aid" to remove all remaining traces of ANSYS 12.
2.I then made sure that all unused network connections were disabled.
3. Reinstalled as usual and FlexID problem is resolved.

However, I have problem with my start-up now. After reinstalling everything i continue to get the message "cannot connect to local server: [email protected]"

For the love of God, someone help!
Balasa

New Delhi, India

#15 Feb 20, 2010
Hey
I am facing the same problem ("cannot connect to local server: [email protected]")
I switched off the firewall, still it persists. Its driving me crazy!
NeedExpert

Australia

#16 Feb 20, 2010
Can somebody help with the problem: "Could not connect to local server: [email protected]"....?
calabazas

Campbell, CA

#17 Feb 23, 2010
For the problem of "Could not connect to local server: [email protected]", I think it is your firewall causing the problem. Whenever program starts, AnsysFWW.exe will try to access Internet and pull in their company news. 24800 error message will display if that program is blocked.

Try setting your firewall to grant AnsysFWW internet access. It should solve it!

Also noticed 50% cpu load by java.exe whenever Ansys program started. It remained so even after program exit. Anyone seeing it?
Frode

Stavanger, Norway

#18 Mar 1, 2010
calabazas wrote:
For the problem of "Could not connect to local server: [email protected]", I think it is your firewall causing the problem. Whenever program starts, AnsysFWW.exe will try to access Internet and pull in their company news. 24800 error message will display if that program is blocked.
Try setting your firewall to grant AnsysFWW internet access. It should solve it!
Also noticed 50% cpu load by java.exe whenever Ansys program started. It remained so even after program exit. Anyone seeing it?
Having the same problem. What is the process? I just terminate it, and no change whatsoever happens in ansys, so it is obviously a process not needed.
Does anyone know how to "uninstall it"?

Since: Feb 10

Campbell, CA

#19 Mar 1, 2010
Here is what I did to make that [email protected] message go away:

- Goto McAfee security panel
- In McAfee panel, goto Reports & Logs
- It shows list of Recent Events, in it, I saw AnsysFWW was blocked from Internet access.
- Choose the blocked line item and click Allow Access.

Now it pulls Ansys News in everytime program starts. Not meaningful to real usage, I think.
Rakz

Randwick, Australia

#20 Mar 5, 2010
Hi guyz

I downloaded Ansys 12 frm torrentz but couldnot find a license file or ap120_calc.exe please help me on how to get a license file.
Rakz

Randwick, Australia

#21 Mar 5, 2010
Hurray...

Got everythng.. now ansys working at its fullest

Tell me when this thread is updated:

Subscribe Now Add to my Tracker
First Prev
of 5
Next Last

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

ANSYS Discussions

Title Updated Last By Comments
topology optimization code_ansys apdl May '17 ju_ange 1
ansys apdl_derivatives May '17 ju_ange 1
Ansys APDL- problem with spring (Feb '17) Feb '17 Anonymous 2
Structural Calculation (Jan '17) Jan '17 genry 1
ANSYS DesignModeler (Jan '17) Jan '17 VSt12 1
Contraction test on ansys (Dec '16) Dec '16 bert 1
Where to find the cohesion value of metal in AN... (Jun '09) Dec '16 tuanpvan 2
More from around the web