How to crack Ansys 11 x64?

How to crack Ansys 11 x64?

Posted in the ANSYS Forum

First Prev
of 2
Next Last
hugo boss

Tyresö, Sweden

#1 Dec 16, 2008
Hi all,

I already cracked Ansys 11 x32 under XP. Now, I try to crack Ansys using my laptop which is running Vista 64. It seems the method is a bit different than the previous one...

Here is the following method I used to crack Ansys 11 in XP:
1. Install Ansys 11 (autoexec.exe->Install Products-> Ansys Products)
2. Install License Management (autoexec.exe->Install Products-> Licence Management)
First question - Answer No
Second question - Answer Yes
3. Start-> Programs-> Ansys Flexlm Licence Manager
Open ANSLIC_ADMIN Utility
Choose: Show HostID...(2nd tab from the top)
Write down: your Hostname and FlexID

4. Go back to the MAGNITUDE folder
open a11calc.exe
answer: NO (just write "N" and hit "enter")
type your Hostname
type your FlexID

5. Copy the licence.dat that has been created
Paste it in X:program files\Ansys\Shared\Licensing\

6. Copy lmgrd32.exe and ansyslmd32.exe from DVD to X:program files\Ansys\Shared\Licensing\i ntel\
and change the two file names into lmgrd.exe and ansyslmd.exe

7. Open LMTools:
Start-> Programs-> Ansys Flexlm-> LMTOOLS Utility

Licence Manager

Check (bottom right corner): LMTools Ignores license file path envrironment variables

In the Config Services tab:
specify path to the lmgrd.exe file: X:program files\Ansys\Shared\Licensing\i ntel\lmgrd.exe

specify path to license file:X:\Program Files\ANSYS Inc\Shared Files\Licensing\license.dat

SAVE

8. Restart your pc
9. You sould be able to open Ansys and Workbench

For Ansys x64, I copied the 2 files from DVD the names lmgrdx64.exe and ansyslmdx64.exe and put them into the following folder: X:program files\Ansys\Shared\Licensing\w inx64\

I also noticed that LMTOOLS Utility doesn't work on the 1st try, I have to install it a first time (I had to enter the port number and the hostID) but when I launch LMTOOLS, there is an error message which is displayed. So I install it a 2nd time. This time, I am not asked to enter the port number or the hostID, but then I can launch LMTOOLS...

I write this message today to try to gather the knowledge and to finaly succeed in the ansys cracking.
So, answer this message and explain what you have done, which results you obtain,...

Regards

hugo boss
hugo boss

Tyresö, Sweden

#2 Dec 17, 2008
Hi!
I finally succeed!!
I installed and cracked ANSYS 11 x64 SP1!!
Here you can find the version I use (emule link on the following webpage):

http://www.edonkey2000.cn/bbs/viewthread.php...

I installed ANSYS as the previous versions (x32), I copied and pasted (into X:program files\Ansys\Shared\Licensing\i ntel\) lmgrdx64.exe and ansyslmdx64.exe from the DVD (the latest I found on it) and I took away the 'x64' from their names.

I had pbs with the license, so I fixed it thanks to 3 steps:
STEP 1: go to the ANSYS DVD Launcher
STEP 2: install the license management once again, but this time install as a server. That is by clicking YES to 1st question and 2nd.
STEP 3: when it ask for the license file, browse the license file that you generated using a110sp1_calc.exe (for me, it is on a folder on the desktop).

Now it should work...

hugo boss
Hector Ramirez

Houston, TX

#3 Dec 24, 2008
Hi,

Hugo
would you send me a copy of a11calc.exe my email is [email protected]
I followed the steps you mentioned for the installation of ANSYS 11 but when it comes to running a11calc.exe the whole thing screw up.

i will appreciate it Hugo give me a hand!

thnaks
Mr_B

Bandung, Indonesia

#5 Jan 27, 2009
hi...
im sorry if my english is not good.
I have a problem with installation Ansys in my XP!
can you tell me, step by step how to insttallation Ansys 11 in my PC ?
thank before!
jimmmyjoe

Dublin, Ireland

#6 Jan 27, 2009
vista has trouble using the lmtools. you can still run the license by opening a command prompt.... then cd to the license directory.... and save the license.dat file here too..
then at the prompt run

lmgrd.exe -c license.dat -l +ansys.log
HDC2000

South Africa

#7 Feb 4, 2009
please hugo send me the magnitude folder contents to me. ansys v11, x64

[email protected]

thanks in advance ;)

Since: Jan 09

Bogotá, Colombia

#9 Feb 18, 2009
Dear Hugo,

Do you find that the x64 version is any faster than the x32? Is it worth going through the trouble of upgrading to Win XP 64 for improvement in performance?
ji_Lim

Seoul, Korea

#10 Mar 5, 2009
Dear hugo boss
please hugo send me the magnitude folder contents to me. ansys v11, x64
(I want user CFX)
[email protected]
thanks in advance ;)
Maniyar

Saudi Arabia

#11 Mar 11, 2009
Dear Friends I'm having Ansys 10 version. I dont know how to install plz help me on this topic mailme on [email protected]
Solid01

Gavorrano, Italy

#12 Mar 18, 2009
Please Hugo can you send me the magnitude folder contents to me...Ansys v11...Thanks for the guide...you are great...

[email protected]

Thanks!!!
yoni

Auburn, AL

#13 Mar 18, 2009
Hi there!!
Please can anyone send me the two files needed for installation of Ansys v11 for win vista!!
mail me at:-

[email protected]
THANKS IN ADVANCE!!
yoni

Auburn, AL

#14 Mar 18, 2009
I forgot to tell the files in magnitude folder

Thanks again!!
siva

Trichy, India

#15 Mar 20, 2009
Hi dear hugo,
I am in need of ANSYS POLYFLOW software.. how shall i crack it. I jus wanna do my thesis thats all.. can u help me in getting it .. give me ur mail id i ll tell you my why i need of polyflow. i still dont know how to analyze layered manufactured parts in ansys.. help me
willian

São José, Brazil

#16 Apr 5, 2009
Thanx Hugo, now it seems to be working fine!

PS: In the a110sp1calc I have, this time, also ticked 'yes' for my pc being a host server.
Turbine

Ebersburg, Germany

#17 Apr 11, 2009
Hi,
did anyone run the cracked version with a Intel dual core or an AMD quad core?
Thanks
Turbine
Abhinay

Lappeenranta, Finland

#18 Apr 11, 2009
Pl some1 help me in installing ANSYS 10.0 software......
anwar

Cairo, Egypt

#19 Apr 15, 2009
toshiba
anwar

Cairo, Egypt

#20 Apr 15, 2009
ansis
YOYO

Thailand

#21 Jun 25, 2009
Dear All,
I just bought a new PC with intel core i7 inside. I try to run ANSYS11 (x64) on it but it doesn't work. There is the error message "A working version of the FLEXlm LMTOOLS Utility is not available for this hardware platform at this time". Could you please tell me how can I fix this error?
O/S of my PC is Vista 64 bit
CPU intel core i7
RAM DDR III 6GB
Thanks in advance.
fernando

Chiclayo, Peru

#22 Jul 12, 2009
william, could you please send me the file 110sp1_calc.exe

my email: [email protected]

Thank you

Tell me when this thread is updated:

Subscribe Now Add to my Tracker
First Prev
of 2
Next Last

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

ANSYS Discussions

Title Updated Last By Comments
ansys apdl_derivatives 8 hr ju_ange 1
Ansys APDL- problem with spring Feb '17 Anonymous 2
Structural Calculation Jan '17 genry 1
ANSYS DesignModeler Jan '17 VSt12 1
Contraction test on ansys Dec '16 bert 1
Where to find the cohesion value of metal in AN... (Jun '09) Dec '16 tuanpvan 2
Problem of non transfer of stress in ansys stru... Dec '16 Akarsh 1
More from around the web