Comments
1 - 20 of 46 Comments Last updated Jun 14, 2014
First Prev
of 3
Next Last
nasim

Iran

|
Report Abuse
|
Judge it!
|
#1
Jul 19, 2010
 
I've installed ansys12 succsessfully but in my workbench I can't reach cfx in toolbox.there are only Geometery and Engineering Data.of course other optons are in the toolbox but they show no response to my double click
Reza

Iran

|
Report Abuse
|
Judge it!
|
#2
Aug 15, 2010
 
Dear Nasim.
what is the release of ansys 12?
is it ansys 12.01 or 12.1?
If it is ansys 12.01, it might have problems with your OS. because I've had the same problem, I suggest you to use windows 7 or windows xp SP3.(ansys 12.01 has also malfunctions with some editions of win xp SP.)
If you have win xp and you do not want to reinstall it, I tell you try windows7.
If you try reinstalling Ansys 12 on your current OS, you will have problems with license registeration.So TRY IT!
(you've probably bought this software from Darya soft Grp,ha?)
Ansys 12.1 does not have such problems
nasim

Isfahan, Iran

|
Report Abuse
|
Judge it!
|
#3
Aug 16, 2010
 
dear reza
thanks for your answer but I've installed it sucessfully twenty days ago.the actual reason of the problem was about installing directory. because I have to install it on windows drive
Bladda

Tampere, Finland

|
Report Abuse
|
Judge it!
|
#4
Apr 3, 2011
 
Hello,

I've experienced the same problem with Ansys 13. All works fine but modules won't appear to toolbox regardless to selecting one from toolbox customization -window. Only Engineering data and Geometry -modules are shown.

Has anyone found a solution to this problem?
Leandro

So Paulo, Brazil

|
Report Abuse
|
Judge it!
|
#5
Apr 9, 2011
 
I have the same problem. How can I solve it?
msh

UK

|
Report Abuse
|
Judge it!
|
#6
Apr 13, 2011
 
I have the same problem with ansys 13 workbench. any comment?
Kristian

Copenhagen, Denmark

|
Report Abuse
|
Judge it!
|
#7
May 26, 2011
 
Hi,

For me it worked when I took ownership of the complete ansys directory. Search for "take ownership windows7", install the adin to your computer. You will se it in the dropdown when you click on the ansys folder. Simply click take ownership and the dos prompt does the work for you. I restarted and then it worked.

Hope it helps:)
saeb2012

Anonymous Proxy

|
Report Abuse
|
Judge it!
|
#8
May 26, 2011
 
i have installed ansys 12.00 in my 32 bit os but the workbench toolbox does not work
ninj4

Oxford, UK

|
Report Abuse
|
Judge it!
|
#9
Sep 27, 2011
 

Judged:

1

I found that going to tools>license preferences
and changing from commercial to academic license allows the use of a lot of the items.
shawon

Bronx, NY

|
Report Abuse
|
Judge it!
|
#10
Oct 29, 2011
 
I am having same toolbox problem in ansys 13.How can i fix this problem?
Mousa

Fremont, CA

|
Report Abuse
|
Judge it!
|
#11
Feb 11, 2012
 
nasim wrote:
I've installed ansys12 succsessfully but in my workbench I can't reach cfx in toolbox.there are only Geometery and Engineering Data.of course other optons are in the toolbox but they show no response to my double click
Hi:
Is your problem solved? I have same problem!
Please guide me. thanks
Bahram

Montral, Canada

|
Report Abuse
|
Judge it!
|
#12
Feb 25, 2012
 
Hello
First turn off your firezall.
Second check the free space on your hard disk.
you need at least 2GB free space.
Kaviresh

Tby, Sweden

|
Report Abuse
|
Judge it!
|
#13
Feb 27, 2012
 

Judged:

3

Even I had the same problem. I couldnt see anything in the Ansys 13 toolbox menu .. After going through the comments in this forum .. I was more than assured that the problem lies somewhere in the licence setup ... So here is what I did ... Checked in Tools>Licence Preferences ... Showed some error ...

Then Started the Ansys, Inc. Licence Manager->Server ANSLIC_ADMIN Utility->ReRead the Licence Manager Settings ... done

then Pressed the Set Licence Preferences for the User ABCDEF(Here my Name Kaviresh)->Then clickedo n the radio button for Ansys 13.0 --- bingo ... then I could see the Toolbox I wanted to use in the Ansys workbench project window ..
Abdo

Sherbrooke, Canada

|
Report Abuse
|
Judge it!
|
#14
Apr 24, 2012
 
hi fellows, I need help
I set up ansys 14, and i started ansys workbench but no icons apears in toolbox.
Konstantine

Sevastopol, Ukraine

|
Report Abuse
|
Judge it!
|
#15
Aug 9, 2012
 

Judged:

6

Just stop and then start the License server. It solved the problem with empty toolbox for my ANSYS 14
Sumoomus

Bandung, Indonesia

|
Report Abuse
|
Judge it!
|
#16
Sep 10, 2012
 
Konstantine wrote:
Just stop and then start the License server. It solved the problem with empty toolbox for my ANSYS 14
Its works. Good Job Konstantine
a friend

Embalse, Argentina

|
Report Abuse
|
Judge it!
|
#17
Sep 18, 2012
 
Thanks Kaviresh! It works!
edisson

Colombia

|
Report Abuse
|
Judge it!
|
#18
Oct 9, 2012
 
tambien tengo el mismo problema pero con ansys 12.1, el toolbox no aparece con todas las opciones y no peuedo hacer nada pido por favir una ayuda
edisson

Colombia

|
Report Abuse
|
Judge it!
|
#19
Oct 9, 2012
 
tambien tengo el mismo problema con ansys 12.1, no me aparece nada en la toolbox y por lo tanto no puedo hacer nada, neceisto una ayuda porfavor
robotnik

Slough, UK

|
Report Abuse
|
Judge it!
|
#20
Oct 13, 2012
 
Konstantine wrote:
Just stop and then start the License server. It solved the problem with empty toolbox for my ANSYS 14
Worked for me too. If stopping the licence manager fails run it as administrator.

Tell me when this thread is updated: (Registration is not required)

Add to my Tracker Send me an email

First Prev
of 3
Next Last
Type in your comments below
Name
(appears on your post)
Comments
Characters left: 4000
Type the numbers you see in the image on the right:

Please note by clicking on "Post Comment" you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

27 Users are viewing the ANSYS Forum right now

Search the ANSYS Forum:
Title Updated Last By Comments
3D Structured Mesh Generation 17 hr Nausheen 1
ansys meshing Jul 15 dhivi 1
ansys workbench explicit dynamincs (Oct '13) Jul 14 waseem 4
ANSYS 13 in Windows 7 Home Premium (Oct '11) Jul 11 simon 2
Prony Viscoelastic Constants (Mar '08) Jun '14 Anonymous 7
How to install ANSYS 13 (Dec '10) May '14 karthik 136
Ansys Workbench Parameter Set May '14 jrz 1
•••
•••