Ansys 11 crack

[sasikiran]

hi there,
i'm using windows xp sp2
Can any one send me the crack for ansys 11.
i have installed the software but the crack ansys 11 sp1 is not working with me...
Please help me out!!
Thanks!

[Zeke2282]

Hi, I have the Ansys V11 but I can`t install it, does anyone know how should I crack this version?

my mail is zeke2282athotmail.com

Thanks!

[Mehmet]

Please, If you have crack file for SP2 then send me my mail;

[e-mail]

[Haythem]

Hi, I have an idea about this install. Just Follow these steps:
install normaly ansys. then launch the "setup licence" it will look for a licence file in a folder named "Licencing".
The licence file you can get it from a folder named "magnitude" where you can find a ansys.dat file. you open it with notepad and then change the name of your computer and an adress. you will get these information from executing "WinHostId".
when finshing this changement, you execute "keygen" this will ran a licence.dat file. You copy it and you paste it in the licencing file. and wait for the end of installation.

this is not all :) you have to go to the environmental variables and create a new one:
ANSYSLMD_LICENSE_FILE = 1055@host
where host is the name of your computer

click ok and enjoy Ansys

good luck

[mmr]

Hey Haythem,
If I look in the Magnitude folder I see just 2 files. One is named a110sp1_calc.exe and should be the keygen. But my virus scanner thinks this is a trojan horse... Windows also wont open of copy the file.
The second file is named info.txt.
Installation of Ansys worked ok with me, I just need the license file en proper settings to get the program to work. Somebody here who can help me out??

[jay]

i am in the same situation.
if i run the a110sp1_calc.exe it creates a license.dat file that it tells me i can use in licensing...
i installed the program fine and i also installed the license manager. i run the anslic_admin utility and go to run the license wizard but it says that the flexlm license manager is not installed...
if anyone knows how to get around this email me at [e-mail]

[aryienne]

I have the same problem as mmr and jay. Jay, you need to install de license manager.

Haythem is right, that is the usual way of ansys cracks. If anybody finds those files (the real ones: keygen, hostid,etc and not the a110sp1_calc), please send me a copy at
[e-mail]

[matrix]

im have same problem any one can help us

[Winsocfix]

Haythem
Qurunbaliyah, Tunisia

Hi Haythem, the procedure that you mentioned above does work for Ansys 10. Thankyou for your help.

[KhaN Han]

I downloaded a110sp1_calc for AnSys v11 but when I run the a110sp1_calc, Nod32 catch trojan and shows the a110sp1_calc as a trojan.
Can someone tell me the way to change the licence.dat manually. I think this is the right way to run Ansys v11. my mail: [e-mail] please send me the way to run Ansys.

[chickoo]

Hey Haythem,
"this is not all :) you have to go to the environmental variables and create a new one:
ANSYSLMD_LICENSE_FILE = 1055@host"
where will I find environmental variables and hw to create the above file

[Zoran]

If some one need crack for ansys 11 write me on
[e-mail]
I will send you

[hugo boss]

chickoo wrote:

Hey Haythem,
"this is not all :) you have to go to the environmental variables and create a new one:
ANSYSLMD_LICENSE_FILE = 1055@host"
where will I find environmental variables and hw to create the above file

To create an environmental variable, you right click on "My Computer", then you select "Advanced" (Top right), you click on "variable environment" which is above the "OK" button.
Then you create new one...

But my problem is : we have to write "ANSYSLMD_LICENSE_FILE = 1055@host" in the variable name or in the value?

Does anyone already succeed in cracking Ansys 11?

cheers

[hugo boss]

I have found and IT WORKS !!!
You don't need to set the environment.

Here is the procedure to crack ANSYS 11 (it works on XP):

1. Install Ansys 11 (autoexec.exe->Install Products-> Ansys Products)
2. Install License Management (autoexec.exe->Install Products-> Licence Management)
First question - Answer No
Second question - Answer Yes
3. Start-> Programs-> Ansys Flexlm Licence Manager
Open ANSLIC_ADMIN Utility
Choose: Show HostID...(2nd tab from the top)
Write down: your Hostname and FlexID

4. Go back to the MAGNITUDE folder
open a11calc.exe
answer: NO (just write "N" and hit "enter")
type your Hostname
type your FlexID

5. Copy the licence.dat that has been created
Paste it in X:program files\Ansys\Shared\Licensing\

6. Open LMTools:
Start-> Programs-> Ansys Flexlm-> LMTOOLS Utility

Licence Manager

Check (bottom right corner): LMTools Ignores license file path envrironment variables

In the Config Services tab:
specify path to the lmgrd.exe file: X:program files\Ansys\Shared\Licensing\i ntel\lmgrd.exe

specify path to license file:X:\Program Files\ANSYS Inc\Shared Files\Licensing\license.dat

SAVE

7. Restart your pc
8. You sould be able to open Ansys and Workbench

[ignacius]

Omg I cant press RUN button in ansys autodyn. Someone have the reason?. My mind will explode!!!

[Doli]

Could someone send me the keygen.
a11calc.exe
I missed the file
my email is; [e-mail]

[kashtybady]

sometimes lmgrd.exe and ansyslmd.exe files dont creat in path of your pc...the problem of installing of ansys11 with cracking may be refer to this...
in way of hugo boss in stage of 6 confident that these files are created...
if in
X:program files\Ansys\Shared\Licensing\i ntel\
there are not that two files,copy lmgrd32.exe and ansyslmd32.exe from DVD to that location of your pc and rename that and cut 32 from thier name..
after these tasks do next stages of 5 to 8 for hugo boss

[seb]

Hello

I've done everything that you have said but i'm not able to SAVE. it says : "This item can't be modified at this location. Please refer to the borrowing tab to make changes to this item".

I'm running under Vista : is this the reason why it's not working for me ?

Any idea ?

Thx

[johnswan1212]

Haythem wrote:

Hi, I have an idea about this install. Just Follow these steps:
install normaly ansys. then launch the "setup licence" it will look for a licence file in a folder named "Licencing".
The licence file you can get it from a folder named "magnitude" where you can find a ansys.dat file. you open it with notepad and then change the name of your computer and an adress. you will get these information from executing "WinHostId".
when finshing this changement, you execute "keygen" this will ran a licence.dat file. You copy it and you paste it in the licencing file. and wait for the end of installation.
this is not all :) you have to go to the environmental variables and create a new one:
ANSYSLMD_LICENSE_FILE = 1055@host
where host is the name of your computer
click ok and enjoy Ansys
good luck

Could someone send crack please

[johnswan1212]

Email is [e-mail]