Comments
1 - 20 of 34 Comments Last updated Mar 16, 2014
First Prev
of 2
Next Last
marsu57

Rahon, France

#1 Nov 11, 2008
Hello,
I have a problem on ANSYS Workbench 11: the detail wiew in simulation isn't displayed on the screen. Can someone help please because it's very difficult to work without that? Thatks and sorry for my bad english :)
Titi

Brazil

#2 Nov 12, 2008
Go to the toolbar where you have File, Edit ... Click View> Windows> Reset Layout.
I hope that works!
marsu57

Lons-le-saunier, France

#3 Nov 12, 2008
Thanks but Sorry Titi it doesn't work.
May be someone else had an idea!!!!
JosePinto

Venezuela

#4 Nov 23, 2008
hello every one!
I have a very extrange problem with ansys 11 workbench. I made the installation of Ansys, when I open ansys classic, everything works fine, but, here is the problem, in the time when I try to star ansys workbench, a windows comes open and tell me this:AWP Global Preference" "Failed determining temp directory location! Aftwer a while, this is followed by the thypical "Report Error to Microsoft Window".
If some body know about this, let me know. here is my email. jlpintov@gmail.com
thanks a lot!
JL
Philip UK

Havant, UK

#5 Mar 6, 2009
marsu57 wrote:
Hello,
I have a problem on ANSYS Workbench 11: the detail wiew in simulation isn't displayed on the screen. Can someone help please because it's very difficult to work without that? Thatks and sorry for my bad english :)
I am getting the same problem no detail view in the simualtion when a friend logs in to the computer the details view is present in the same simulation. Any Ideas?
hello everybody

Athens, Greece

#6 Mar 20, 2009
I am an amature ansys user and i want to built a capacitor to examine the electric field inside it.
The problem is that i can not realy understand how to define the electrodes and the hole frame (the capacitor have air between the electrodes).Ansys so far reject the potential areas. Also ansys wants to define tha magnetic flux density (where?? in the electrostatic capacitor)
Thanks again
Wasim

Boca Raton, FL

#7 Mar 23, 2009
Hello. I have a problem with ansys workbench.
I have to work with fatigue tool. If i use material as structural steel, then I can be able to solve, but instead of that if i use another material like a foam, it does not work.

Could you please anyone give hints to solve this.
fast

Rome, Italy

#8 Mar 31, 2009
i have problems with workbench too. others works but when i launch ansys workbench i see only start page and no icons, i mean empty project,design modeller etc etc...no ideas to solve it?
thanks
Dino

Zurich, Switzerland

#9 May 11, 2009
Hey. I had the same problem with the missing 'Details view'. And i could not solve it. In the end I had to import the whole geometry and begin from the start. The window will go missing if you move it and do not put it back in place before closing ansys workbench.... Very much trouble!
Dino

Zurich, Switzerland

#10 May 11, 2009
oh damn. im sorry. once 'detail view' is gone in the simulation, it never returns. im doomed.
Dino

Zurich, Switzerland

#11 May 11, 2009
marsu 57

I've solved the problem. What u need to do, is close the whole application and go to C:\Documents and Settings\(your username)\Application Data\Ansys.
in this folder you have to delete or rename the folder 'v110'. Then when u restart ur ansys workbench the configuration will be set back to default. And then u will have ur detail view window again.
jomoclife

United States

#12 May 20, 2009
I'm new using ansys and I'm doing do to some FEA on a permanent magnet using ansys, can anybody offer some insight on this? Thanks.
help for modal analysis

Iran

#13 May 28, 2009
I am working on a acoustic project which I have to fine modal analysis.
I want to find solution combination of modal (e.g. show the first vibration mode on X axle and second vibration mode on Y axle altogether).

Is that possible to do it in workbench?

please help..
Karthik Sathiyaseelan

Coimbatore, India

#14 Aug 4, 2009
Hi all!!
I am studing BE in PSG college of Technology, coimbatore. I am doing my final year project work in "Random vibration analysis in PCB". The analysis is being carried out in Ansys workbench. At first I used Coarse mesh to solve the model and then changed into fine mesh. After changing the mesh modal analysis is solved but vibration analysis is not solving.. Giving an Error "NOT ALL REQUIRED FILES FOUND. THE RESTRAT FALIED" ...
So, Please help me overcome this problem..
(it's urgent)
Reza Moazezi

Iran

#15 Aug 11, 2009
Khurram

Shah Alam, Malaysia

#16 Sep 11, 2009
Can anyone tell me the procedure of doing a transient thermal analysis in Ansys Workbench v11.
sandeep

Mumbai, India

#17 Sep 29, 2009
i have to give time dependent boundary condition for an axisymmetric problem in ANSYS. i have created ARRAY table.when i applied the conditions while giving BCs to the line, it showed absurd results like temp values near the line is very less 0.005. can anybody help me in this regard.
molly

Rockville, MD

#18 Jan 5, 2010
Philip UK wrote:
<quoted text>
I am getting the same problem no detail view in the simualtion when a friend logs in to the computer the details view is present in the same simulation. Any Ideas?
I had this problem this morning, and finally had to call our ANSYS support group to find it.

You have to close out of Workbench, and go into C:\Documents and Settings\USERNAME\Application Data\Ansys (Application Data is a hidden folder). From there, you must change the name of the v110 folder (to v110.old or something similar), and then restart Workbench. Workbench will create a new v110 folder with the correct settings.

Good luck, all!
shambhu

Mumbai, India

#19 Jan 15, 2010
can anyone tell me how to define contat between two line bodies or line and surface body.
or is anyone solved the verification manual SVDM 19 (Simulation Descriptions)of ANSYS workbench 11, then tell me how to define the contact between surface body and line body.
Reza Moazezi

Iran

#20 Jan 27, 2010

Tell me when this thread is updated: (Registration is not required)

Add to my Tracker Send me an email

First Prev
of 2
Next Last

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

ANSYS Discussions

Title Updated Last By Comments
ERROR: Feature MAPDL Solve Capability timed out 4 hr Florasaurus17 1
vibration analysis of buckled beam Aug 25 kartikey shahi 1
Connect mesh to volume in Ansys APDL Aug 19 Giacomo 1
Ansys Piezoelectric Harmonic Analysis (Feb '13) Aug 14 Quoc Le 3
User defined results Aug 11 bobering 1
ansys wb Aug 10 awad 1
comb drive simulation (Dec '10) Jul 31 Cyberbob 3
•••
Enter and win $5000
•••

ANSYS People Search

Addresses and phone numbers for FREE

•••