Che Reagan Christ

Lodi, OH

#466 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
you are one stupid punk
if you subtract 33% from 3/8's the sum is?
good thing you receive govt handout checks, as you prove how impossible it would be for you to earn anything but the label stupid.
you are a disgrace to humanity; and continue to demonstrate how dangerous you are to society, and for us to protect ourselves at all costs from you and your ilk.
You are priceless, Walter. Even after folks who you tend to agree and identify with here gently tried to explain why you are wrong, you refuse to even consider the possibility that you could be mistaken and continue to aggressively insult people who are correct. But hey. That's what makes you such a source of entertainment. That's what makes you a classic GOP mouthpiece. That's what makes you you, Walter. Stay thirsty my friend.
Reality Speaks

Columbus, OH

#467 Feb 26, 2013
Che Reagan Christ wrote:
<quoted text>
You are priceless, Walter. Even after folks who you tend to agree and identify with here gently tried to explain why you are wrong, you refuse to even consider the possibility that you could be mistaken and continue to aggressively insult people who are correct. But hey. That's what makes you such a source of entertainment. That's what makes you a classic GOP mouthpiece. That's what makes you you, Walter. Stay thirsty my friend.
OK you failure

2 + 2 is 7, quit crying.

3/8's is 33% larger than 1/4

find me anyone who disagrees with above statement; and you will have brought forth yet another moron.

Question for anyone who has ability to think.

if asked to mill 33% off a piece of steel 3/8 thick, how thick is the new machined piece?

the only one mistaken is you; and that is consistent with your every post.
Che Reagan Christ

Lodi, OH

#468 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
OK you failure
2 + 2 is 7, quit crying.
3/8's is 33% larger than 1/4
find me anyone who disagrees with above statement; and you will have brought forth yet another moron.
Question for anyone who has ability to think.
if asked to mill 33% off a piece of steel 3/8 thick, how thick is the new machined piece?
the only one mistaken is you; and that is consistent with your every post.
That would make the new piece 33% smaller than the old piece. But if you made the new piece 33% larger, it wouldn't end up 3/8.

Your problem isn't with the arithmetic. It is with your understanding of the use of the concepts involved. You aren't as smart as you think you are.
Reality Speaks

Columbus, OH

#469 Feb 26, 2013
Che Reagan Christ wrote:
<quoted text>
That would make the new piece 33% smaller than the old piece. But if you made the new piece 33% larger, it wouldn't end up 3/8.
Your problem isn't with the arithmetic. It is with your understanding of the use of the concepts involved. You aren't as smart as you think you are.
your problem is you are a punk

you spin and lie about everything to attempt to prove your new manufactured intelligence.

you failed again as always.

my original statement was 3/8 is 33% thicker than 1/4 when considering bullet penetration; and your Bushmaster evil destruction mass murderous pea shooter will not shoot through it at 200 yards.

if I added 33% to your math skills, you might just maybe pass the 6th grade proficiency test.

you never could pass a lie detector test, because when you open your mouth it is a lie.
Che Reagan Christ

Lodi, OH

#470 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
your problem is you are a punk
you spin and lie about everything to attempt to prove your new manufactured intelligence.
you failed again as always.
my original statement was 3/8 is 33% thicker than 1/4 when considering bullet penetration; and your Bushmaster evil destruction mass murderous pea shooter will not shoot through it at 200 yards.
if I added 33% to your math skills, you might just maybe pass the 6th grade proficiency test.
you never could pass a lie detector test, because when you open your mouth it is a lie.
Keep posting, Walter. This is great.

“Don't trust the internet!”

Since: Jan 12

Location hidden

#471 Feb 26, 2013
-tip- wrote:
<quoted text>
Like a pro-homosexual "Christian" would know anything about "faithful translation" of the Holy Bible.
Homophobia a new required class in seminary these days?

“Don't trust the internet!”

Since: Jan 12

Location hidden

#472 Feb 26, 2013
Adif understanding wrote:
<quoted text>What is your point? You basically said the same thing I did. However, your fantasy about the KJV being mistranslated is just that. Outside of it missing some books and a few word being translated in ways to ensure the Episcopal Ecclesiology was prominent, It is accurate. The rest is where the study I mentioned comes into play.
The King James Bible is at best a third hand translation, written to align with political, rather than religious, tenets.

Like the Vulgate before it, it is recognized more on literary merits than on faithfulness to original texts--some of which were not even available at the time that the King James was written.

“Don't trust the internet!”

Since: Jan 12

Location hidden

#473 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
doomsday, like all the airport closings, and teacher layoffs due to sequester kicking in?
like that kind of doomsday fabricated upon the LIE of their being any cuts period. Why all the doomsday when the expenditures are increased $15 billion from 2012 expenditures.
what is flopping around like fish on a dock, is the epic failures of this president and his cabinet.
Obama created the sequester as a punishment to Republicans for not agreeing with him.
Obama was at fault in the first place requiring a sequester.
now he is being handed is his bite of a feces sandwich. He will have eaten entire sandwich when discussing debt ceiling mid- march.
you are as relevant as a snow shovel in Ft Lauderdale during spring break.
Tell you what, RS. Ask someone whose salary has been flat for five years if they are doing just as well today as they were five years ago, OK?

Any time that the rate of increase is less than the rate of inflation, something is going to have to go--even if there are more dollars.

See, there's dollars, and then there's REAL dollars.

“Don't trust the internet!”

Since: Jan 12

Location hidden

#474 Feb 26, 2013
Wait what wrote:
<quoted text>
Reader, you are really having a time of it lately. The Bible was not written in Aramaic. I hate to use this link but I am too tired to get out the serious links. From Wiki:
http://en.wikipedia.org/wiki/Biblical_Aramaic
Parts of the Bible were written in Aramaic.

In some cases the best existing version (closest to the original) is a translation into Aramaic.

The Bible was written across centuries by many people--and actually compiled and decisions made about what was in and what was out were made much later.
Che Reagan Christ

Lodi, OH

#475 Feb 26, 2013
-tip- wrote:
<quoted text>
Like a pro-homosexual "Christian" would know anything about "faithful translation" of the Holy Bible.
Is pro-homosexual Christian code for "Catholic?"

“animis opibusque parati”

Since: Oct 12

Location hidden

#476 Feb 26, 2013
Che Reagan Christ wrote:
<quoted text>
Is pro-homosexual Christian code for "Catholic?"
No, but "Che" is code for "f'n idiot."
Reality Speaks

Columbus, OH

#478 Feb 26, 2013
FKA Reader wrote:
<quoted text>
Tell you what, RS. Ask someone whose salary has been flat for five years if they are doing just as well today as they were five years ago, OK?
Any time that the rate of increase is less than the rate of inflation, something is going to have to go--even if there are more dollars.
See, there's dollars, and then there's REAL dollars.
correct; and you don't understand real dollars.
Reality Speaks

Columbus, OH

#479 Feb 26, 2013
fyi people

paper prices at the mill are rising $50 a ton in April.

This is the second $50 a ton raise in 6 months.

This translates to 16% roughly to someone who uses paper.

enjoy paying 16% at minimum more this July, than you did the July prior. This applies if you utilize thousands of tons. If you don't expect 20% at minimum.

“Don't trust the internet!”

Since: Jan 12

Location hidden

#480 Feb 26, 2013
Reality Speaks wrote:
fyi people
paper prices at the mill are rising $50 a ton in April.
This is the second $50 a ton raise in 6 months.
This translates to 16% roughly to someone who uses paper.
enjoy paying 16% at minimum more this July, than you did the July prior. This applies if you utilize thousands of tons. If you don't expect 20% at minimum.
You saying that it's going to cost you more to make your pizza boxes?

And you're going to charge your customers more to cover it?

But if the cost of government goes up, it must be a sign of waste and we should make the employees eat the cost? Oh, and give the customers a price break?

“Don't trust the internet!”

Since: Jan 12

Location hidden

#481 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
correct; and you don't understand real dollars.
Says the guy who swears that 3/8 is 33% more than 1/4.

Hope you have somebody trustworthy doing your books for you.
Reality Speaks

Columbus, OH

#482 Feb 26, 2013
FKA Reader wrote:
<quoted text>
You saying that it's going to cost you more to make your pizza boxes?
And you're going to charge your customers more to cover it?
But if the cost of government goes up, it must be a sign of waste and we should make the employees eat the cost? Oh, and give the customers a price break?
I don't make pizza boxes.

that is another lib spin lie you like to help spread to cover your inadequate comparison with peers.

But to answer your question...yes...every single customer will receive the price increase.

and yes you the consumer pays the ultimate price.

PS: I am commissioned based 100%....I just received a 16% pay increase in 6 months due to price increases. I am paid on volume. Cost up 16%, so are commissions.

PSS: the govt employees never eat the cost; but the taxpayer always does.

PSSS: why would I ever give you a break? you are not a customer.
Che Reagan Christ

Lodi, OH

#483 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
I don't make pizza boxes.
that is another lib spin lie you like to help spread to cover your inadequate comparison with peers.
But to answer your question...yes...every single customer will receive the price increase.
and yes you the consumer pays the ultimate price.
PS: I am commissioned based 100%....I just received a 16% pay increase in 6 months due to price increases. I am paid on volume. Cost up 16%, so are commissions.
PSS: the govt employees never eat the cost; but the taxpayer always does.
PSSS: why would I ever give you a break? you are not a customer.
Not only are you mathematically challenged with your entire percentage bugaboo, but you are using your whole "PSS" thing wrong. Think about it and see if you can figure it out.
Reality Speaks

Columbus, OH

#484 Feb 26, 2013
Che Reagan Christ wrote:
<quoted text>
Not only are you mathematically challenged with your entire percentage bugaboo, but you are using your whole "PSS" thing wrong. Think about it and see if you can figure it out.
that is really funny....did Mommy let you breast feed?
Che Reagan Christ

Lodi, OH

#485 Feb 26, 2013
Reality Speaks wrote:
<quoted text>
that is really funny....did Mommy let you breast feed?
What was funny about it?
Reality Speaks

Columbus, OH

#486 Feb 26, 2013
FKA Reader wrote:
<quoted text>
Says the guy who swears that 3/8 is 33% more than 1/4.
Hope you have somebody trustworthy doing your books for you.
and because you can't perform math it is not you.

genius O Reader the brilliant one.....subtract 33% from 3/8.....what is the sum?

Hint....take.375 and multiply it by .66666666666666666666666666666 6666

what is the sum O brilliant Reader the magnificent?

could it be .250 or 1/4?

can your brain of asphalt absorb that?

it is doubtful after reading your posts.

Tell me when this thread is updated:

Subscribe Now Add to my Tracker

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Columbus Discussions

Title Updated Last By Comments
OH Who do you support for Governor in Ohio in 2010? (Oct '10) 6 min Duke for Mayor 31,486
Armed Contractor on Elevator with President 9 min Duke for Mayor 6
Double standards for muslims, bending league rules 10 min BizzyBee 29
7mo prego couple seeking bi girl. 33 min Obama is Bush wit... 8
Xenos Christian Fellowship is a CULT! (Jul '12) 1 hr Old Timer 958
Early Voting VICTORY for Ohio! 1 hr Duke for Mayor 24
The Political Nazi's are at it again! 1 hr Duke for Mayor 78
Two fish were swimming upstream.... 2 hr Duke for Mayor 385
Is Barack Obama Doing a Good Job as President? (Aug '13) 4 hr Pope Che Reagan C... 3,544

Columbus Jobs

Columbus People Search

Addresses and phone numbers for FREE

Columbus News, Events & Info

Click for news, events and info in Columbus

Personal Finance

Mortgages [ See current mortgage rates ]