Dendrimers can significantly improve ...

Dendrimers can significantly improve the mechanical property of epoxy system.

Posted in the Huntington Forum

Level 1

Since: Apr 13

Fremont, CA

#1 Aug 21, 2013
A small amount of hydroxyl groups of dendrimer (CYD-CR111/CYD-CR236/CYD-CV111 /CYD-CV486) react with epoxy curing system to form a three dimensional network structure. Blending with the epoxy system by a simple physical method, due to the special structure of the molecule as well as physical interactions with epoxy matrix, it can significantly improve the mechanical properties of epoxy systems.(1) at low temperature (77 K) hydroxy terminated dendrimers can improve the tensile strength and impact strength of epoxy resins, with mass fraction of 10% of hydroxy-terminated dendrimer, compared to the pure epoxy resin system, the tensile strength increased from the original 98.2MPa to 115.6MPa, increased by 17.7%; failure strain increased with the amount increased of dendrimer, when dosage is 10%, increased from the original 1.9% to 3.1%, increased by 63.2%.(2) the impact strength increased from 25.4 ± 2.7 to 32.0 ± 1.0, increased by 26.0%, and after adding the dendrimer, impact strength at low temperatures is not lower than room temperature, and appropriate dosage of hydroxyl terminated dendrimers does not lower Tg of condensate. Weihai CY Dendrimer Technology Co. Ltd.-Professional Manufacturer for low cost dendritic polymers.
nunya

Nashville, TN

#2 Aug 21, 2013
marryshaw wrote:
A small amount of hydroxyl groups of dendrimer (CYD-CR111/CYD-CR236/CYD-CV111 /CYD-CV486) react with epoxy curing system to form a three dimensional network structure. Blending with the epoxy system by a simple physical method, due to the special structure of the molecule as well as physical interactions with epoxy matrix, it can significantly improve the mechanical properties of epoxy systems.(1) at low temperature (77 K) hydroxy terminated dendrimers can improve the tensile strength and impact strength of epoxy resins, with mass fraction of 10% of hydroxy-terminated dendrimer, compared to the pure epoxy resin system, the tensile strength increased from the original 98.2MPa to 115.6MPa, increased by 17.7%; failure strain increased with the amount increased of dendrimer, when dosage is 10%, increased from the original 1.9% to 3.1%, increased by 63.2%.(2) the impact strength increased from 25.4 ± 2.7 to 32.0 ± 1.0, increased by 26.0%, and after adding the dendrimer, impact strength at low temperatures is not lower than room temperature, and appropriate dosage of hydroxyl terminated dendrimers does not lower Tg of condensate. Weihai CY Dendrimer Technology Co. Ltd.-Professional Manufacturer for low cost dendritic polymers.
WHAT THE FRESH HELL IS THIS?? If you're not white trash that is trying to air out who knocked who up or complain about how the cops pull you over for DUI when you're driving drunk then GET OFF HERE, WE HAVE NO USE FOR YOU!!

Tell me when this thread is updated:

Subscribe Now Add to my Tracker

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Huntington Discussions

Title Updated Last By Comments
Kroger In Barboursville (Aug '13) 42 min fedup 17
Bryan Smith/Brian Smith 1 hr Kitty cat 4
Democratic National Committee fail 2 hr Basic Truths 49
New beer cafe on 4th ave 2 hr Shea 3
Dem Covention 3 hr MarkJ- 5
Dentist (Jan '13) 3 hr Mamamia 53
Republican Convention, fail! 3 hr Tycho Crater 182

Huntington Jobs

More from around the web

Personal Finance

Huntington Mortgages