Cheer Coach Arrested for Raping 13-Ye...

Cheer Coach Arrested for Raping 13-Year-Old Girl

There are 70 comments on the ArkansasMatters story from Jan 7, 2013, titled Cheer Coach Arrested for Raping 13-Year-Old Girl. In it, ArkansasMatters reports that:

A well-known central Arkansas cheer and gymnastics coach was arrested in Heber Springs for raping a 13-year-old girl.

Join the discussion below, or Read more at ArkansasMatters.

First Prev
of 4
Next Last
close to home

Heber Springs, AR

#1 Jan 7, 2013
This is very sad, sick and scary. He was around many many young girls, wonder how many victims there really are? I was thinking about enrolling my child for lessons at this gym, thank God I never did!!
murry

Dallas, TX

#2 Jan 7, 2013
I hope they beat the hell out of him in jail. People like that don't deserve to see the light of day again after they do something like that
yishunbike

Japan

#3 Jan 7, 2013
A patch kit (a few different patch sizes, sandpaper or a metal scraper, and a tube of glue), a set of tire levers, and an air pump.
With the wheel removed from your bike, inspect the outer ICAbike01 surface of the tire to make sure there are no sharp objects like a thumb-tack or thorn stuck in the tread.
Remove Tir
Remove the valve cap and fully deflate the[url=http://www.icarbonspor ts.com/products/wheels-rims/ca rbon-bike-rims/]carbon fiber rims[/url]tube by depressing the valve stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
Now it’s time to remove your tire, one side at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
After you have removed one side of the tire, the other side should come off very easily.
Inspect Tube
Now remove the tube from the tire, and try to keep track of where itICAbike01 was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
Listen carefully to the entire circumference[url=http://www.i carbonsports.com/products/whee ls-rims/carbon-bike-rims/]carb on bike rims[/url]of the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
Once you’ve found the leak, take note of whether it is on the inner or outer side of the tube.
If the hole was on the outer side of the tube, inspect the inner surface of the tire in that spot to make sure the object that caused the puncture is not still stuck in the tire. Double check the entire inner side of the tire by running your fingers along the entire surface, feeling for obstacles along the way.
If the hole was on the inner side of the tube,[url=http://www.icarbonsp orts.com/products/wheels-rims/ carbon-bike-rims/]carbon bicycle rims[/url]inspect your entire rim to make sure there are no sharp burrs in the metal, and that the rim tape is properly protecting the tube from your spoke ends.
Now that the rim and tire are clear, it’s time to patch the tube.[url=http://www.icarbonsp orts.com/]zipp 404[/url]Select an appropriate sized patch for the hole. Use the sandpaper or scraper provided in your kit to buff the surface of the tube for an area a bit larger than the patch. You need to buff the tube so that it is no longer shiny. If the molding line is running along the area where the patch is to be applied, you must sand it down completely, or it will provide an air channel. Once buffed, avoid touching that area with your fingers.
Apply a dab of rubber cement, and then spread it into a thin coat, using your cleanest finger. Work quickly. You want a thin, smooth coat of cement; if you keep fiddling with it as it begins to dry, you’ll risk making it lumpy. The thinner the cement, the faster it will dry. It is very important to allow the cement to dry completely.
Peel the foil from the patch and press the patch onto the tube firmly, squeezing the patch tightly onto the tube.
Biker dude

Heber Springs, AR

#4 Jan 8, 2013
yishunbike wrote:
A patch kit (a few different patch sizes, sandpaper or a metal scraper, and a tube of glue), a set of tire levers, and an air pump.
With the wheel removed from your bike, inspect the outer ICAbike01 surface of the tire to make sure there are no sharp objects like a thumb-tack or thorn stuck in the tread.
Remove Tir
Remove the valve cap and fully deflate the[url=http://www.icarbonspor ts.com/products/wheels-rims/ca rbon-bike-rims/]carbon fiber rims[/url]tube by depressing the valve stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
Now it’s time to remove your tire, one side at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
After you have removed one side of the tire, the other side should come off very easily.
Inspect Tube
Now remove the tube from the tire, and try to keep track of where itICAbike01 was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
Listen carefully to the entire circumference[url=http://www.i carbonsports.com/products/whee ls-rims/carbon-bike-rims/]carb on bike rims[/url]of the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
Once you’ve found the leak, take note of whether it is on the inner or outer side of the tube.
If the hole was on the outer side of the tube, inspect the inner surface of the tire in that spot to make sure the object that caused the puncture is not still stuck in the tire. Double check the entire inner side of the tire by running your fingers along the entire surface, feeling for obstacles along the way.
If the hole was on the inner side of the tube,[url=http://www.icarbonsp orts.com/products/wheels-rims/ carbon-bike-rims/]carbon bicycle rims[/url]inspect your entire rim to make sure there are no sharp burrs in the metal, and that the rim tape is properly protecting the tube from your spoke ends.
Now that the rim and tire are clear, it’s time to patch the tube.[url=http://www.icarbonsp orts.com/]zipp 404[/url]Select an appropriate sized patch for the hole. Use the sandpaper or scraper provided in your kit to buff the surface of the tube for an area a bit larger than the patch. You need to buff the tube so that it is no longer shiny. If the molding line is running along the area where the patch is to be applied, you must sand it down completely, or it will provide an air channel. Once buffed, avoid touching that area with your fingers.
Apply a dab of rubber cement, and then spread it into a thin coat, using your cleanest finger. Work quickly. You want a thin, smooth coat of cement; if you keep fiddling with it as it begins to dry, you’ll risk making it lumpy. The thinner the cement, the faster it will dry. It is very important to allow the cement to dry completely.
Peel the foil from the patch and press the patch onto the tube firmly, squeezing the patch tightly onto the tube.
This is all wrong !
Biker dude

Heber Springs, AR

#5 Jan 8, 2013
yishunbike wrote:
A patch kit (a few different patch sizes, sandpaper or a metal scraper, and a tube of glue), a set of tire levers, and an air pump.
With the wheel removed from your bike, inspect the outer ICAbike01 surface of the tire to make sure there are no sharp objects like a thumb-tack or thorn stuck in the tread.
Remove Tir
Remove the valve cap and fully deflate the[url=http://www.icarbonspor ts.com/products/wheels-rims/ca rbon-bike-rims/]carbon fiber rims[/url]tube by depressing the valve stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
Now it’s time to remove your tire, one side at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
After you have removed one side of the tire, the other side should come off very easily.
Inspect Tube
Now remove the tube from the tire, and try to keep track of where itICAbike01 was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
Listen carefully to the entire circumference[url=http://www.i carbonsports.com/products/whee ls-rims/carbon-bike-rims/]carb on bike rims[/url]of the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
Once you’ve found the leak, take note of whether it is on the inner or outer side of the tube.
If the hole was on the outer side of the tube, inspect the inner surface of the tire in that spot to make sure the object that caused the puncture is not still stuck in the tire. Double check the entire inner side of the tire by running your fingers along the entire surface, feeling for obstacles along the way.
If the hole was on the inner side of the tube,[url=http://www.icarbonsp orts.com/products/wheels-rims/ carbon-bike-rims/]carbon bicycle rims[/url]inspect your entire rim to make sure there are no sharp burrs in the metal, and that the rim tape is properly protecting the tube from your spoke ends.
Now that the rim and tire are clear, it’s time to patch the tube.[url=http://www.icarbonsp orts.com/]zipp 404[/url]Select an appropriate sized patch for the hole. Use the sandpaper or scraper provided in your kit to buff the surface of the tube for an area a bit larger than the patch. You need to buff the tube so that it is no longer shiny. If the molding line is running along the area where the patch is to be applied, you must sand it down completely, or it will provide an air channel. Once buffed, avoid touching that area with your fingers.
Apply a dab of rubber cement, and then spread it into a thin coat, using your cleanest finger. Work quickly. You want a thin, smooth coat of cement; if you keep fiddling with it as it begins to dry, you’ll risk making it lumpy. The thinner the cement, the faster it will dry. It is very important to allow the cement to dry completely.
Peel the foil from the patch and press the patch onto the tube firmly, squeezing the patch tightly onto the tube.
This is all incorrect
Bike owner

Heber Springs, AR

#6 Jan 8, 2013
yishunbike wrote:
A patch kit (a few different patch sizes, sandpaper or a metal scraper, and a tube of glue), a set of tire levers, and an air pump.
With the wheel removed from your bike, inspect the outer ICAbike01 surface of the tire to make sure there are no sharp objects like a thumb-tack or thorn stuck in the tread.
Remove Tir
Remove the valve cap and fully deflate the[url=http://www.icarbonspor ts.com/products/wheels-rims/ca rbon-bike-rims/]carbon fiber rims[/url]tube by depressing the valve stem with the hooked end of your tire lever. There are two main types of valve stems, a schrader valve and a presta valve. This tutorial is based on a schrader valve, but I will be covering the different valve types in another tutorial.
Now it’s time to remove your tire, one side at a time. Choose a section of tire that is away from the valve and hook one of the tire levers under the bead, directly in line with one of your spokes. Pry one side of the tire bead over the edge of the rim, and then hook the end of the tire lever to the nearest spoke. Insert another tire lever two spokes away from the first, and a third another two spokes away. Now the middle lever should fall out, and you can continue the process. When the tire is loose enough you can just run a tire lever around the rest of the rim to pull the whole side over.
After you have removed one side of the tire, the other side should come off very easily.
Inspect Tube
Now remove the tube from the tire, and try to keep track of where itICAbike01 was positioned in relation to the tire. Inflate the tube to approximately twice its original size. This will expand the hole making it easier to find.
Listen carefully to the entire circumference[url=http://www.i carbonsports.com/products/whee ls-rims/carbon-bike-rims/]carb on bike rims[/url]of the tube; you should hear a hissing sound that will indicate where the leak is. As a last resort you can submerge the tube in water and watch for bubbles, but you’ll want to avoid doing this as you’ll need the tube to be completely dry in order for the patch glue to work.
Once you’ve found the leak, take note of whether it is on the inner or outer side of the tube.
If the hole was on the outer side of the tube, inspect the inner surface of the tire in that spot to make sure the object that caused the puncture is not still stuck in the tire. Double check the entire inner side of the tire by running your fingers along the entire surface, feeling for obstacles along the way.
If the hole was on the inner side of the tube,[url=http://www.icarbonsp orts.com/products/wheels-rims/ carbon-bike-rims/]carbon bicycle rims[/url]inspect your entire rim to make sure there are no sharp burrs in the metal, and that the rim tape is properly protecting the tube from your spoke ends.
Now that the rim and tire are clear, it’s time to patch the tube.[url=http://www.icarbonsp orts.com/]zipp 404[/url]Select an appropriate sized patch for the hole. Use the sandpaper or scraper provided in your kit to buff the surface of the tube for an area a bit larger than the patch. You need to buff the tube so that it is no longer shiny. If the molding line is running along the area where the patch is to be applied, you must sand it down completely, or it will provide an air channel. Once buffed, avoid touching that area with your fingers.
Apply a dab of rubber cement, and then spread it into a thin coat, using your cleanest finger. Work quickly. You want a thin, smooth coat of cement; if you keep fiddling with it as it begins to dry, you’ll risk making it lumpy. The thinner the cement, the faster it will dry. It is very important to allow the cement to dry completely.
Peel the foil from the patch and press the patch onto the tube firmly, squeezing the patch tightly onto the tube.
I always fix mine this way
Idiots

United States

#8 Jan 8, 2013
Umm there's proof she was lieing on fb & the day she said it had Happened December 8th he was at a completion & she was not there cuz she is not on his team so some thing just doesn't make since and if u go on Facebook & look on Matt Andrews page there is the proof of her saying it isn't true and she was trying to fix everything so before bashing him get ur facts straight please :))
...

Heber Springs, AR

#9 Jan 8, 2013
It's pretty sad that people are too worried about their cheer team rather than the fact tink is a pedophile. He's a creep. Why in the world would he even be contacting a 13 year old (7th grader) when he is 25? That's sick, He has all you cheer moms fooled. And I find it rather convincing that 4 other parents came foward saying that tinkle had inappropriate contact/actions/communication with their kids too. Stop defending a sick man like tink.
angry and frustrated

Conway, AR

#10 Jan 8, 2013
well i heard it happened during Christmas break so its all kinds of a messed up story,, the girl said it happened then said it didnt,, but your right the dates dont add up and if the girl is lying just for revenge or attention the girl needs to be punished cause even if he gets out innocent and the girl is found to be lying i think mr tinkle should counter sue her and get her for all kinds of charges and if i was her mother id be pretty pissed cause she just didnt ruin her own reputation but her mothers her fathers her family her friends,, her teachers,, everyone will never believe her again and if she was to really get raped later no ones gonna believe her this is a serious matter and she might as well be proud of her self cause no matter if she didnt lie mr tinkles rep for his self and his gym are gonna be ruined forever parents will wake up and be scared to put there children in any event after this,, and as for the parent that says shes glad she didnt enroll her child dont be afraid to now mr tinkle is not there as of now and the other coaches are wonderful.. they gym is a great place.. well my children would still be going there if they didnt close down while all this stuff wraps i or out..and my other opinion to all you nonfactual gossipers you should be ashamed of yourself s make this town look more hypocritical then it already is.. this town is based on whom your last name is and how much money in the bank you have and what church you go to,, its horrible,, and if someone looking in on this from another town,, I would be like hell no im not moving to Heber springs to many gossipers... looks bad on everyone the innocent and the non innocent.
Innocent

United States

#12 Jan 8, 2013
And while admitting she said someone else said it happened why in the hell did somebody else tell her parents it happened she must have been jealous or something but I honestly don't think it happened I think it's just some little girls who are jealous of each other and accused Matt..Matt is freaking gay he has had sex with 2 guys already I don't think these little girls fit his attraction he's a coach a cheer coach all the girls are gonna fall in love with the guy geez and as or the lock ins everybody needs to chill out parents were there I don't think any parent is gonna let their child stay at a lock in with out any parent supervision besides a male coach..but oh we'll I just don't believe this has really happened my opinion
trinity

United States

#14 Jan 8, 2013
Tink did not do this so until everybody knows the facts the need to stop plastering about it....hes life is ruined because of some girls....they should be ashamed of them selves....hang tough tink
LOL

Heber Springs, AR

#15 Jan 8, 2013
"That's sick, it's twisted and disgusting, this is wear I live," said Janova Willis who has a 15-year-old daughter

But that lady is a felon herself with that 15 year old daughter with a 1 year old baby by a 20 year old who SHE introduced her daughter to and let the 20 year old live in her home and knew they were having sex... that makes zero sense. She must have been high that day and just wanted to be on tv...
nonya

United States

#16 Jan 8, 2013
LOL wrote:
"That's sick, it's twisted and disgusting, this is wear I live," said Janova Willis who has a 15-year-old daughter
But that lady is a felon herself with that 15 year old daughter with a 1 year old baby by a 20 year old who SHE introduced her daughter to and let the 20 year old live in her home and knew they were having sex... that makes zero sense. She must have been high that day and just wanted to be on tv...
That's good stuff. I wonder if the news station would take that part out if they knew.
wow

Greenbrier, AR

#17 Jan 8, 2013
LOL wrote:
"That's sick, it's twisted and disgusting, this is wear I live," said Janova Willis who has a 15-year-old daughter

But that lady is a felon herself with that 15 year old daughter with a 1 year old baby by a 20 year old who SHE introduced her daughter to and let the 20 year old live in her home and knew they were having sex... that makes zero sense. She must have been high that day and just wanted to be on tv...
Bahahahah wow
broken hearted

Heber Springs, AR

#18 Jan 8, 2013
I know of a young boy who attended his classes and all of a sudden wanted to quit. Come to find out he said Matt made him uncomfortable with whisperings, and this young boy is gay also.
Innocent

Quitman, AR

#19 Jan 8, 2013
stop defending him

Conway, AR

#20 Jan 8, 2013
I know two young girls he's had sexual relationships with. It wasnt just he said, she said. They were very open about it. I've hung out with him and friends his age and he told his friends it was awkward. Creeeeeeepppppp!
Falsely Accused

Greenville, TX

#21 Jan 8, 2013
This man has done nothing but try and help a community. He grew up in abusive environment, over came so many adversities and worked hard to put himself through college. This girl has no idea the consequences of her actions and how many lives she has ruined. The truth will come to light and Matthew will be proven innocent and just like the good person he is, he would not seek punishment for the girl, but hope she gets the help she needs.
Ferl

Fairfax, VA

#23 Jan 9, 2013
Falsely Accused wrote:
This man has done nothing but try and help a community. He grew up in abusive environment, over came so many adversities and worked hard to put himself through college. This girl has no idea the consequences of her actions and how many lives she has ruined. The truth will come to light and Matthew will be proven innocent and just like the good person he is, he would not seek punishment for the girl, but hope she gets the help she needs.
You need help if u think its ok for a 25 year old person to have sex with a 13 year old
Whatever

Heber Springs, AR

#25 Jan 9, 2013
tiedtheknot wrote:
I am 67 and had sex with an 18 year old. what yall think about that?
How much did you have to pay for it?

Tell me when this thread is updated:

Subscribe Now Add to my Tracker
First Prev
of 4
Next Last

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Heber Springs Discussions

Title Updated Last By Comments
Paytons 7 hr Cowboy 1
New Walmart? 21 hr Richard Stevenson 4
Land for sale? Mon Top 4
Please Forgive Me Jan 15 Fading so swift 3
witch doctor in rosebud (Sep '11) Jan 15 Cody 29
attorneys (Feb '12) Jan 14 No Judgement 20
abortion doc Jan 12 OMG 4

Heber Springs Jobs

More from around the web

Personal Finance

Heber Springs Mortgages