Microwave Radio Link(Ericsson Mini Link)

Microwave Radio Link(Ericsson Mini Link)

Posted in the Telecom Forum

First Prev
of 9
Next Last
Yahya

Muscat, Oman

#1 Aug 20, 2008
We are facing the problem in RX level,we raciev at one end -45 dbm and on other end we are recieving -50 dbm.
We have tried maximum on allignment,
Can any boday tell what may be the problem,
Eri

Hungary

#2 Aug 29, 2008
Check your antenna alignment. One side could be on a side track, that could cause the difference.
If you want to be more sure if it's a side track, than wait for a windy day, and if there is many signal degradation on one side, than you can be sure.

Otherwise check your mechanical installation.
Mohammad Kamrul Hassan

Dhaka, Bangladesh

#3 Aug 31, 2008
Yahya wrote:
We are facing the problem in RX level,we raciev at one end -45 dbm and on other end we are recieving -50 dbm.
We have tried maximum on allignment,
Can any boday tell what may be the problem,
Firstly try to do alingment, if failed then change ODU and your problem will be solved.
enuha alexander

Port Harcourt, Nigeria

#4 Feb 3, 2009
a. what range can the radio go
b. can the radio do both E1/T1 and eternet
c.it the radio a weather restitant
d. other advantage over radio
Systechnik

Lagos, Nigeria

#5 Feb 27, 2009
Its our job....its unfortunate that we do not give out info like that.....you can contact us for round table talk.

Thanks
Duke Nukem

UAE

#6 Apr 1, 2009
Hi

We have a NEC Pasolink MW installed at our office and last week we had a storm and since then it is failing everyday,mainly during the night. We have reported it to our service provider but they say there is nothing wrong. I'm looking for the software for the MW so that I can see what the levels are and have a look at the fault history as our service provider says there's nothing wrong. Any tips on where I can get the software.
Rafiuddin

Saudi Arabia

#7 May 7, 2009
We have installed 6P at one and installed a new MMU2 c in the existing in the existing 20P

But in the 20P we are getting the error radio link not connected but everyt thing is connected
and also it says software not comaptible
pompoiman

Bangkok, Thailand

#8 May 14, 2009
Duke Nukem wrote:
Hi
We have a NEC Pasolink MW installed at our office and last week we had a storm and since then it is failing everyday,mainly during the night. We have reported it to our service provider but they say there is nothing wrong. I'm looking for the software for the MW so that I can see what the levels are and have a look at the fault history as our service provider says there's nothing wrong. Any tips on where I can get the software.
nec passolink is accessed via hyperterminal you just need the connection leads from laptop to radio interface and the correct config settings into the radio to see what is what,
lekky1

Nigeria

#9 May 20, 2009
i want to configure an ericsson radio. how do i upgrade the baseline of the mmu2. thanks
oxxa

Jakarta, Indonesia

#10 May 28, 2009
hi all!!
greetings!

just curious..can we use Andrew LDF4.5-50 Heliax for 7Ghz radio or above?? pls advise.
Thx in advance.
jorgeE

Panama, Panama

#11 Jun 4, 2009
You need to things the baseline software and the BFT server you have it
lekky1 wrote:
i want to configure an ericsson radio. how do i upgrade the baseline of the mmu2. thanks
M Aamir Shaikh

Pakistan

#12 Aug 13, 2009
Kindly Update the Software release of your 20p Magazine and and G10 release will be compitable for this....
Sudeep

Riyadh, Saudi Arabia

#13 Aug 17, 2009
Hi,

Please check the connectors. Clean it and use new connectors..there might be water
dogsha

Sudan

#14 Aug 22, 2009
hi all
i am asking why we are not use damy in 2G,
except in the feild and we used it alwayes
in 3G when we want to check the feeders by
sitemaster thanks
dogsha

Sudan

#15 Aug 23, 2009
what is the kind or type of feeder that used
in 2G and 3G ?

what is the main problems that facing the alignment ?
usman-yasir

Muscat, Oman

#16 Sep 7, 2009
this is our mobile number 00968-98516306----------still we r doing the same work, if u ve any inquiry, please contact us!!!!!!!!!!
nandoga

Bogotá, Colombia

#17 Sep 22, 2009
necesito el software del radio Ericsson Minilik, para windows vista
donde lo puedo descargar....

Gracias...
Ejike

Satellite Provider

#18 Sep 27, 2009
I need an Ericson 3U Magazine (Rack only) to install a mini link radio for my client. Any one knows where i can source it from?

Thanks
Zubair_SZA_KSA

Saudi Arabia

#19 Sep 29, 2009
HI all,
I have a problem in my region with xpic links. no. problem is there is fadding and also there is visibility problem for IPs and also there is BIT error, and this bit error is some time good even for 14 day test but later sometime when checked again is giving error.
Can anybody tell about this
BR
mujeeb

Riyadh, Saudi Arabia

#20 Oct 5, 2009
I want to know installation procedure and positioning details of 20p for a mini link Hi-Cap antenna

Tell me when this thread is updated:

Subscribe Now Add to my Tracker
First Prev
of 9
Next Last

Add your comments below

Characters left: 4000

Please note by submitting this form you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Telecom Discussions

Title Updated Last By Comments
News Southside Chiques injunction upheld (Jul '08) Oct 16 CO Boy13 66
News Senate confirms Trump nominee Ajit Pai to head FCC Oct 3 anonymous 1
News Siemens Independent power grid as a milestone f... Sep '17 Solarman 1
News In FCC complaint, AT&T accused of discriminatin... Aug '17 Mayor Mike Rawlings 1
News Update on Paetec World Headquarters (Jul '09) Aug '17 CityRes 13
News Family sues AT&T over violent slaying of Waco t... Jul '17 RickN 1
Telco Asset MGMT CEO Brent Bauer Speaking at IS... Jul '17 Brian Hodges 1
More from around the web