Comments
1 - 20 of 116 Comments Last updated Jun 17, 2014
First Prev
of 6
Next Last
Joe

Bristol, VA

|
Report Abuse
|
Judge it!
|
#1
Apr 2, 2007
 
I just bought a used AB Dick 9870 and the ink leaks from the fountain. It appears the fountain is too big. Any ideas how to fix this problem?
T R Weatherly

United States

|
Report Abuse
|
Judge it!
|
#2
Apr 18, 2007
 
Call AB Dick and ask for ink foutian seals.under 10.00$ Remove N O side ink foutian Bushing.Remove philips screw from O side bushing,Slid ink roller to N O and out. clean and lub with gress,on oil.
DIOGENES REYES

Miami, FL

|
Report Abuse
|
Judge it!
|
#3
Apr 23, 2007
 
my name is diogenes and i am looking for rebuilt machinery AB DICK MODEL 9810 & 9840 i would to know if somebody of you know a supplier please write at my email jdrbanegas@hotmail.com
purchase@shinsung.hn i will appreciate your help at this mater
Jonathan Parkins

Ghana

|
Report Abuse
|
Judge it!
|
#4
May 18, 2007
 
I just bought ABDick 9870, but unfortunatly the instructional manual is in German. Need help to translate into English or if any one has an English version to spare, tahat will be great.
Merritt DeLaughter

Little Rock, AR

|
Report Abuse
|
Judge it!
|
#5
May 21, 2007
 
My Father purchased a 9840 just before his death in Oct. I'm looking for it a new home if you are interested.

dan.delaughter@hotmail.com
DIOGENES REYES wrote:
my name is diogenes and i am looking for rebuilt machinery AB DICK MODEL 9810 & 9840 i would to know if somebody of you know a supplier please write at my email jdrbanegas@hotmail.com
purchase@shinsung.hn i will appreciate your help at this mater
dave

Orlando, FL

|
Report Abuse
|
Judge it!
|
#6
May 21, 2007
 
depending on how old the press is (year)...the fountain roller should be fine (i dont think you need to tear everything apart) the previous owner probably dropped the fountain on the ground and bent it ....it only takes a little bit for it to leak...
so you may have to fork over the money for a new ink fountain..........
jim

New Baltimore, MI

|
Report Abuse
|
Judge it!
|
#7
Jun 10, 2007
 
I have an ab dick 9850 and during runs with 20lb bond, jumps out of impression. Anyone know what causes this?
parasuraman

Auckland, New Zealand

|
Report Abuse
|
Judge it!
|
#8
Jun 21, 2007
 
DIOGENES REYES wrote:
my name is diogenes and i am looking for rebuilt machinery AB DICK MODEL 9810 & 9840 i would to know if somebody of you know a supplier please write at my email jdrbanegas@hotmail.com
purchase@shinsung.hn i will appreciate your help at this mater
Email: parasu1965@yahoo.com for used printing machinery
Tankado

Samsun, Turkey

|
Report Abuse
|
Judge it!
|
#9
Jul 9, 2007
 
We just using 9870 and have problem with paper feed synchronization. Machine fetchs a paper early and the carrier lute tearing the paper. Anyone know what causes this?
C dashkowitz

Aurora, CO

|
Report Abuse
|
Judge it!
|
#10
Sep 20, 2007
 
Merritt DeLaughter wrote:
My Father purchased a 9840 just before his death in Oct. I'm looking for it a new home if you are interested.
dan.delaughter@hotmail.com
<quoted text>
How much would you want and where is it located?
Roger

United States

|
Report Abuse
|
Judge it!
|
#11
Oct 8, 2007
 
AB Dicks or famous for thing like this, you need to replace the rubber seals at the end of the roller
Roger
Bob

United States

|
Report Abuse
|
Judge it!
|
#12
Feb 21, 2008
 
I have a A.B.Dick 9870, does anyone know how to take total count of sheets run from the computer board?
Kelly H

Blytheville, AR

|
Report Abuse
|
Judge it!
|
#13
Feb 28, 2008
 
Bob wrote:
I have a A.B.Dick 9870, does anyone know how to take total count of sheets run from the computer board?
If I understand correctly, you're wanting to clear the count after a run. Push sheet count,0(zero),E(enter).
Sam M

Blacklick, OH

|
Report Abuse
|
Judge it!
|
#14
Mar 27, 2008
 
I am new to running a press and my work has an AB Dick 9850. The question I am hoping to get answered is why would there be sheets that have nothing printed on them at all? Meaning it will be running fine and then all of the sudden there will be sheets that go through and come out with no ink on them. There is no pattern to it, it just happens like once every ten sheets. Any help would be greatly appreciated.
Floyd

Lake Saint Louis, MO

|
Report Abuse
|
Judge it!
|
#15
Mar 27, 2008
 
Try clearing out the paper lint around the metal feed roller. Especially around the feed sensor.
Sam M wrote:
I am new to running a press and my work has an AB Dick 9850. The question I am hoping to get answered is why would there be sheets that have nothing printed on them at all? Meaning it will be running fine and then all of the sudden there will be sheets that go through and come out with no ink on them. There is no pattern to it, it just happens like once every ten sheets. Any help would be greatly appreciated.
virgil

Marilag, Philippines

|
Report Abuse
|
Judge it!
|
#16
Apr 29, 2008
 

Judged:

1

I just want to learn on how to run or use the ab dick. I am planning to apply as an operator of this machine and a little trouble shooting guide.If someone can give me a copy of manual and trouble shooting guide. your help is highly appreciated
Tim Anderson

Harrisonburg, VA

|
Report Abuse
|
Judge it!
|
#18
Jun 5, 2008
 
Sam M wrote:
I am new to running a press and my work has an AB Dick 9850. The question I am hoping to get answered is why would there be sheets that have nothing printed on them at all? Meaning it will be running fine and then all of the sudden there will be sheets that go through and come out with no ink on them. There is no pattern to it, it just happens like once every ten sheets. Any help would be greatly appreciated.
You need to replace the sensor under the feed rollers. They wear out periodically
TA Press operator for 20+ years
Tim Anderson

Harrisonburg, VA

|
Report Abuse
|
Judge it!
|
#19
Jun 5, 2008
 
You need to look into replacing the paper sensor under the feed end. It is a small black box mounted on the chrome feed plate by the feed rollers
Ajith Etulgama

Sri Lanka

|
Report Abuse
|
Judge it!
|
#20
Jun 21, 2008
 
I want wiring diagram,for ABDIC9870. plse, help me.
Roger Walton

Montgomery, AL

|
Report Abuse
|
Judge it!
|
#21
Jun 25, 2008
 
Your double sheet detector/sensor may be lose or in need of replacement
Sam M wrote:
I am new to running a press and my work has an AB Dick 9850. The question I am hoping to get answered is why would there be sheets that have nothing printed on them at all? Meaning it will be running fine and then all of the sudden there will be sheets that go through and come out with no ink on them. There is no pattern to it, it just happens like once every ten sheets. Any help would be greatly appreciated.

Tell me when this thread is updated: (Registration is not required)

Add to my Tracker Send me an email

First Prev
of 6
Next Last
Type in your comments below
Name
(appears on your post)
Comments
Characters left: 4000
Type the numbers you see in the image on the right:

Please note by clicking on "Post Comment" you acknowledge that you have read the Terms of Service and the comment you are posting is in compliance with such terms. Be polite. Inappropriate posts may be removed by the moderator. Send us your feedback.

Other Recent Commercial Printing Discussions

Search the Commercial Printing Forum:
Title Updated Last By Comments
Vinyl Banners Are Valuable Products (Nov '09) 18 hr Jerry Boggs 3
Used printing machinery - Heidelberg, Solna, Ed... (Feb '09) Jul 18 looking for cup printer 9
Quad/Graphics nears end (Nov '11) Jul 17 jeff loos 52
Posters and Pamphlets (Apr '13) Jul 15 TOM MCANA 3
Sand-coated print? Textured printing? (Mar '13) Jul 15 TOM MCANA 2
Printing House from Latvia (Aug '08) Jul 15 TOM MCANA 4
How to Print Faster with Your Laser Printer (Mar '13) Jul 15 TOM MCANA 2
•••
•••